Use this shock absorber from Festo when you want to reduce noise and cushion harsh impacts in pneumatic drives. The component is self-adjusting and instantly reacts to changes in force. It has a gentle stopping motion, so it prevents spring-back that can cause damage or excessive wear to parts. This unit's piston rod automatically returns to its original position and is made from high-alloy steel for strength and corrosion resistance.

• Stroke length of 26 mm
• Maximum impact speed of 3 m/s
• Reset time range of 0.3 s to 1 s
• Single-acting pushing action
• Cushioning length of 26 mm
• Maximum stop force of 2000 N
• Reset force of 6 N
• Housing material of galvanised steel
• Seal material of NBR (nitrile butadiene rubber)
• Operating temperature range of -10°C to +80°C
• Locknut mounting
• Weight of 190 g

• The hydraulic shock absorbers in Festo's YSRW series have path-controlled functions and long cushioning strokes
• The units are maintenance-free and don't contain copper or PTFE (Polytetrafluoroethylene)
• These units are suitable for use with Festo pneumatic drives that have high acceleration and deceleration

The Festo silencer used for reducing noise and avoiding contamination at the exhaust port of pneumatic component. It assembled in any position and operating pressure complete temperature range 0 - 10 bar. Its flow rate to atmosphere is 150 l/min.

Ambient temperature -10 to 70 °C
Used brass, bronze material