At the heart of each Biofy® Eco1 is a Biofy® SFH7072 sensor. Apart from two green emitters and one photodiode with an infrared filter, it also contains one red and one infrared emitter as well as a broadband photodiode. The distance between the three latter components was increased so that more light is reflected onto the detector. The
improved signal quality of the measurements with infrared and red light simplifies the calculation of the oxygen saturation of blood (SpO2). Eco1s are compact, powerful LED light sources built on FR4 PCB with thermal vias for optimal thermal management. Biofy® Eco1s generate very little heat and therefore do not require any secondary Heat Sinking.

Biofy® Eco1s contain a Biofy® SFH7072 Sensor*
Mounting holes using M3 screws allows easy installation
Size (LxWxH): 20.25x13.70x0.90mm
SFH7072 contains:
1 x Infrared Emitter 950nm
1 x Red LED 660nm
2 x Green LED 530nm
1 x IR Cut Detector with a spectral range sensitivity of 402...694nm
1 x Broadband Detector spectral range sensitivity of 420…1100mm