Omron G9SB 1 Auxiliary Contacts Safety Relay 24V ac/dc, Dual-Channel 3 Safety Contacts

The Omron G9SB series is an ultra slim safety relay available in either a 17.5mm or 22.5mm housing. The 17.5mm units have 2 or 3 safety contacts and the 22.5mm units have 3 safety contacts and an auxiliary contact.

1 and 2 input channel units
Manual and automatic reset units
Certification up to category 4 according to EN954-1 (depending on the application)
Can also be used with safety sensors F3SN, F3SH, F3S-B, F3STGR, F3SL, F3S-J
Conforms to EN standards (TUV approval)

When ordering take note of the safety reset mode that is required: Models G9SB**A and G9SB ** B = Auto Reset operation; Models G9SB ** D = Manual Reset operation

EN954-1, EN60204-1, UL508, CSA C22.2 No. 14

To nip hazards in the bud, protect your equipment with this safety relay from OMRON. It monitors your machine's emergency stop circuit and brings the appliance to an instant halt when the switch is pressed. This prevents accidents that could otherwise cause injury and downtime. A narrow width of 22.5mm makes it easy to slot the device into tight setups and enclosures. As it consumes just 30mA of current during operation, you can trust this is an energy-efficient solution. Thanks to tool-free DIN rail mounting, you don't have to dig into your toolbox to install it.

• Dielectric strength of 2.5kV AC shows that it's a reliable insulator that handles high voltages without suffering breakdown
• Light weight of 120g means it's easy to handle during installation and won't strain your setup
• Does its job reliably in an operating temperature range between -25°C and +55°C, making it safe for use in demanding conditions

• Material handling equipment
• Construction sites
• Oil and gas plants

This efficient unit consumes just 1.7VA of power on AC networks or 1.7W on DC circuits.