Wago 788 24 V dc Safety Relay With 2 Safety Contacts

  • RS Stock No. 180-3065
  • Mfr. Part No. 788-384
  • Brand Wago
Technical Reference
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): DE
Product Details

Relay module with driven contacts, Nominal input voltage: 24 VDC, 2 changeover contacts, Limiting continuous current: 8 A, Red status indicator, Module width: 15 mm

Reinforced insulation between coil and contacts
A separator plate (e.g., 209-191) must be used for voltages greater than 250 V between adjacent relay modules and for compliance with the reinforced insulation requirements.
To protect the relay coils and contacts, inductive loads must be dampened with an effective protection circuit.

Specifications
Attribute Value
Supply Voltage 24 V dc
Auxiliary Contacts 2
Function Safety Relay
Safety Contacts 2
Terminal Type Cage Clamp
Depth 64mm
Width 86mm
Length 15mm
Available to back order for despatch 14/11/2019
Price Each
£ 31.41
(exc. VAT)
£ 37.69
(inc. VAT)
Units
Per unit
1 +
£31.41
Related Products
The SensaGuard Non-Contact Switch is PLe, SIL 3 ...
Description:
The SensaGuard Non-Contact Switch is PLe, SIL 3 and Cat 4 rated and is intended for use with sliding, hinge or lift-off machine guard doors. These safety switches are based on RFID (Radio Frequency IDentification) technology for coding and inductive technology for sensing. Combined with a large sensing range for ...
The Bulletin 100S-C safety contactors provide mechanically linked ...
Description:
The Bulletin 100S-C safety contactors provide mechanically linked positively guided contacts, required in feedback circuits of modern safety applications. The mechanically linked N.C. auxiliary contacts will not change state when a power pole welds. In addition, the gold-plated bifurcated auxiliary contacts are ideally suited for low-energy applications or feedback control ...
For protecting people and machinesThe BG 5925 is ...
Description:
For protecting people and machinesThe BG 5925 is also suitable for switching small loads thanks to gold-plated contactsEvaluation device for light barriers with self-test functionCompliant with the EC Machines Directive 98/37/EC1 or 2-channel configurationActivation via the ON button or automatic ON function when the operating voltage is metLine termination detection ...
XPS-VC switches XY2AU used in conjunction with the ...
Description:
XPS-VC switches XY2AU used in conjunction with the XPS-VC safety relay offer a certified safety solution ensuring the safety of machine operators during setting and maintenance operationsUse while carrying out adjustment of moving partsAllows operators to enable start and stop instructions while movements are being performed at reduced speeds and ...