The Omron G9SB series is an ultra slim safety relay available in either a 17.5mm or 22.5mm housing. The 17.5mm units have 2 or 3 safety contacts and the 22.5mm units have 3 safety contacts and an auxiliary contact.

1 and 2 input channel units
Manual and automatic reset units
Certification up to category 4 according to EN954-1 (depending on the application)
Can also be used with safety sensors F3SN, F3SH, F3S-B, F3STGR, F3SL, F3S-J
Conforms to EN standards (TUV approval)

When ordering take note of the safety reset mode that is required: Models G9SB**A and G9SB ** B = Auto Reset operation; Models G9SB ** D = Manual Reset operation

EN954-1, EN60204-1, UL508, CSA C22.2 No. 14

Nip electrical hazards in the bud with this safety relay from OMRON. The device's emergency stop function shuts equipment down if it detects an issue, working with a safety mat or light curtain to deliver effective workforce protection. With a reaction time of 10ms, the switch springs into action to quickly respond to faults. Thanks to its auxiliary contact, it alerts your control device when it switches for hassle-free monitoring. Tool-free rail mounting means you can clip the relay into a cabinet in a flash.

• 2 input channels for handy dual-circuit fault monitoring
• Electrical service life of at least 100,000 operations to provide long-term safety measure control
• Low maximum power usage of 1.7W to cut down on energy consumption
• Screw terminals means fingers stay clear of conductors

• Heavy engineering
• Process control
• Packaging industry

To cut unnecessary downtime out of the equation, this unit automatically resets after a fault, getting your hardware running again as soon as it's safe to do so.