Looking for a reliable component that supports combined loads on your machine shaft? Take a turn with this roller bearing from SKF. It's made up of a single row of tapered rollers in an inner ring set against an outer ring. As these rollers are angled, they accommodate radial and axial loads simultaneously. The axial load-carrying capacity increases as the contact angle widens. This unit is separable and interchangeable, so you have free rein to quickly take the rings apart and rearrange them during maintenance.

• Dynamic load rating of 228kN and static load rating of 245kN to balance heavy-duty loads
• Rugged sheet metal cage shrugs off impacts
• Reference and limiting speeds of 3800r/min and 4500r/min for use on high-velocity shafts

• Automotive engineering
• Fishing equipment
• Textile production
• Assembly lines

This bearing has dimensions of 80mm ID, 140mm OD and 35.25mm width to fit onto large machine shafts.

Yes, you can pair up two single-row tapered roller bearings on your shaft. To combine them, mount one against the other and apply a preload to achieve a rigid finish.