FAG NJ205-E-XL-TVP2-C3 25 mm I.D Roller Bearing, 52 mm O.D
- RS Stock No.:
- 194-7335
- Mfr. Part No.:
- NJ205-E-XL-TVP2-C3
- Brand:
- FAG
Image representative of range
Bulk discount available
Subtotal (1 unit)*
£38.93
(exc. VAT)
£46.72
(inc. VAT)
FREE delivery for orders over £50.00
Temporarily out of stock
- Shipping from 19 January 2026
Need more? Click ‘Check delivery dates’ to find extra stock and lead times.
Units | Per unit |
|---|---|
| 1 - 4 | £38.93 |
| 5 - 9 | £37.38 |
| 10 - 24 | £36.60 |
| 25 + | £35.82 |
*price indicative
- RS Stock No.:
- 194-7335
- Mfr. Part No.:
- NJ205-E-XL-TVP2-C3
- Brand:
- FAG
Specifications
Technical Reference
Legislation and Compliance
Product Details
Find similar products by selecting one or more attributes.
Select all | Attribute | Value |
|---|---|---|
| Brand | FAG | |
| Product Type | Roller Bearing | |
| Inside Diameter | 25 mm | |
| Race Width | 15mm | |
| Bore Type | Parallel | |
| Outside Diameter | 52 mm | |
| Dynamic Load Rating | 34.5kN | |
| End Type | Open | |
| Static Load Rating | 27.5kN | |
| Standards/Approvals | No | |
| Select all | ||
|---|---|---|
Brand FAG | ||
Product Type Roller Bearing | ||
Inside Diameter 25 mm | ||
Race Width 15mm | ||
Bore Type Parallel | ||
Outside Diameter 52 mm | ||
Dynamic Load Rating 34.5kN | ||
End Type Open | ||
Static Load Rating 27.5kN | ||
Standards/Approvals No | ||
Single row cylindrical roller bearings with cage are suitable where:
Bearing arrangements are subjected to very high radial loads
Not only high radial forces but also axial loads from one or both directions must be supported by the bearing position (semi-locating or locating bearing function)
Bearing arrangements must have very high rigidity
Axial displacements of the shaft relative to the housing must be compensated without constraint in the bearing (in the case of bearings with a non-locating or semi-locating bearing function)
High radial loads and very high speeds occur but the very high radial load carrying capacity of full complement cylindrical roller bearings is not required
The bearings should be separable (one bearing ring can be removed) for easier mounting
Related links
- FAG NJ205-E-XL-TVP2 25 mm I.D Roller Bearing, 52 mm O.D
- INA N205-E-XL-TVP2-C3 25 mm I.D Roller Bearing, 52 mm O.D
- FAG NU305-E-XL-TVP2-C3 25 mm I.D Cylindrical Roller Bearing, 62 mm O.D
- RS PRO NJ205-E-TVP3-C3 25 mm I.D Roller Bearing, 52 mm O.D
- FAG NU205-E-XL-TVP2 25 mm I.D Roller Bearing, 52 mm O.D
- FAG NUP205-E-XL-TVP2 25 mm I.D Roller Bearing, 52 mm O.D
- INA N205-E-XL-TVP2 25 mm I.D Roller Bearing, 52 mm O.D
- FAG NJ206-E-XL-TVP2-C3 30 mm I.D Roller Bearing, 62 mm O.D