INA HK0910-B 9mm I.D Drawn Cup Needle Roller Bearing, 13mm O.D
- RS Stock No.:
- 194-6935
- Mfr. Part No.:
- HK0910-B
- Brand:
- INA
Bulk discount available
Subtotal (1 unit)*
£4.66
(exc. VAT)
£5.59
(inc. VAT)
FREE delivery for orders over £50.00
Temporarily out of stock
- Shipping from 14 November 2025
Need more? Click ‘Check delivery dates’ to find extra stock and lead times.
Units | Per unit |
---|---|
1 - 4 | £4.66 |
5 - 9 | £4.38 |
10 - 24 | £4.28 |
25 + | £4.20 |
*price indicative
- RS Stock No.:
- 194-6935
- Mfr. Part No.:
- HK0910-B
- Brand:
- INA
Specifications
Technical Reference
Legislation and Compliance
Product Details
Find similar products by selecting one or more attributes.
Select all | Attribute | Value |
---|---|---|
Brand | INA | |
Inside Diameter | 9mm | |
Outside Diameter | 13mm | |
Roller Bearing Type | Drawn Cup Needle | |
Race Width | 10mm | |
Bore Type | Parallel | |
Material | Steel | |
Static Load Rating | 4650N | |
Cage Material | Sheet Steel | |
Number of Rows | 1 | |
Dynamic Load Rating | 4250N | |
End Type | Open | |
Fatigue Limit Load | 610N | |
Select all | ||
---|---|---|
Brand INA | ||
Inside Diameter 9mm | ||
Outside Diameter 13mm | ||
Roller Bearing Type Drawn Cup Needle | ||
Race Width 10mm | ||
Bore Type Parallel | ||
Material Steel | ||
Static Load Rating 4650N | ||
Cage Material Sheet Steel | ||
Number of Rows 1 | ||
Dynamic Load Rating 4250N | ||
End Type Open | ||
Fatigue Limit Load 610N | ||
Are particularly suitable for Applications with a very small radial section height on account of their very low cross-sectional height
Are used if the housing bore is not suitable as a raceway for needle roller and cage assemblies
Can support high radial loads (are pure radial bearings)
Require a considerably smaller radial design envelope than machined needle roller bearings
Usually run directly on the shaft (no inner ring)
Permit relatively high speeds
Are easy to mount
Require no additional means of axial retention (as a result of which the housing bore is easy to produce)
Can be readily used to close off the shaft ends of bearing positions (drawn cup needle roller bearings with closed end)
Result in particularly compact, cost-effective and economical bearing arrangements
Are used if the housing bore is not suitable as a raceway for needle roller and cage assemblies
Can support high radial loads (are pure radial bearings)
Require a considerably smaller radial design envelope than machined needle roller bearings
Usually run directly on the shaft (no inner ring)
Permit relatively high speeds
Are easy to mount
Require no additional means of axial retention (as a result of which the housing bore is easy to produce)
Can be readily used to close off the shaft ends of bearing positions (drawn cup needle roller bearings with closed end)
Result in particularly compact, cost-effective and economical bearing arrangements
Related links
- INA HK0908-B 9mm I.D Drawn Cup Needle Needle Roller Bearing, 13mm O.D
- INA HK0912-B 9mm I.D Needle Roller Bearing, 13mm O.D
- INA HK1312-B 13mm I.D Drawn Cup Needle Roller Bearing, 19mm O.D
- SKF HK 0509 5mm I.D Drawn Cup Needle Roller Bearing, 9mm O.D
- INA BK0509-B 5mm I.D Drawn Cup Needle Needle Roller Bearing, 9mm O.D
- INA HK0606-B 6mm I.D Drawn Cup Needle Roller Bearing, 10mm O.D
- INA HK1412-B 14mm I.D Drawn Cup Needle Roller Bearing, 20mm O.D
- INA HK1210-B 12mm I.D Drawn Cup Needle Roller Bearing, 16mm O.D