Use this SKF needle roller bearing to ease the rotary motion of a shaft. The deep-drawn outer wall provides an increased contact area, making it particularly capable of supporting large loads. The bearing's open-ended construction allows for more effective circulation of lubricant, and it enables a maximum speed of 32000 rpm when oil is used. It's especially useful for situations where a very compact and economic bearing arrangement is called for. You'll find needle roller bearings such as this in automotive engineering applications.

• Parallel cage bore
• Sheet steel
• Dynamic load rating of 2.81 kN
• Limit load of 285 N
• Inside diameter of 6 mm
• Maximum speed (grease) of 20000 rpm
• Maximum speed (oil) of 32000 rpm
• Outside diameter of 10 mm
• Race width of 9 mm
• Static load rating of 2.7 kN

• Manufacturing
• Construction
• Automotive engineering

In general, this needle roller bearing is used directly on a shaft that has already been ground and hardened. In cases where the shaft isn't hard enough, you can use the bearing in conjunction with an inner ring.