3M, 1.27 mm Pitch, 64

This ribbon cable provides a compact, flexible interconnection solution for electronic assemblies and automation equipment. It is a flat, multi-conductor cable intended for signal and low-power wiring within control cabinets, instruments and mechanical systems where confined routing and repeated flexing are required.

• 1.27mm pitch supports dense connector interfaces and saves space
• 6 conductors deliver multi-signal routing in a single assembly
• 28AWG stranded conductors improve bending endurance during flexing
• Tin plating on copper conductors resists corrosion for consistent contact
• Polyolefin jacket in dark grey offers chemical resistance in enclosures
• Low smoke zero halogen construction reduces toxic emissions during fire

• Suitable for internal wiring in automation controllers
• Ideal for ribbon-to-board interconnection in electronic modules
• Used for harnessing in robotics with frequent motion
• Can be used for signal routing inside instrument cabinets
• Used with connectors requiring 1.27mm pitch termination

It is rated to operate between -40°C and 105°C to suit both cold storage and elevated-temperature equipment interiors.

Each conductor comprises seven fine strands which increase flexibility compared with solid cores, enabling high-flex routing.

The cable is unscreened and therefore requires external earthing or screening methods if electromagnetic interference mitigation is needed.

The jacket material is formulated to produce minimal smoke and no halogenated gases when exposed to fire, lowering toxic fume generation.

It conforms to several standards for material and smoke performance and carries a UL file reference for its construction and testing.

UL recognised