Use this Schneider Electric single contact block as a direct interface for switches or buttons that control your electrical circuits. It's easily mounted to the front of your equipment using its screw terminals, which ensure a secure fit. This method of installation also makes the unit easy to adjust and replace if needed. The slow break operation model adds a time delay to the actual contact action, for reliable operation in sensitive low-power switching systems. You can integrate this contact block with compatible electric circuit breakers, switches and stop buttons.

• Service life of 1,000,000 hours for reliable use in large-scale operations
• Gold-flashed contacts are resistant to corrosive chemicals
• IP5X (ingress protection) rating indicates protection from damage caused by dust contamination

• Emergency systems
• Storage facilities
• Assembly lines

In this NC (normally closed) contact block, current flows as long as the switch contact remains in a closed position, preventing any interference to the flow. Activation triggers the contact to open and pauses the flow of current.

CSA C22-2 No 14
EN/IEC 60947-1
EN/IEC 60947-5-1
EN/IEC 60947-5-4
EN/IEC 60947-5-5
JIS C 4520
UL 508