Pico Technology Oscilloscope Probe, Probe Type: Passive 350MHz 1:10

Technical Reference
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): DE
Product Details

Pico 350MHz High Impedance Passive Probe TA150, 10:1 with BNC

Pico TA150 is a high-impedance passive probe with 350MHz bandwidth. It is designed for use with oscilloscopes with a 1MΩ input impedance and has a fixed attenuation of 10:1. The TA150 has been compensated to ensure optimal performance with the PicoScope 6402 and 6403 oscilloscopes. The compact design of this high-performance probe means there is only 2.5mm housing diameter at the probe tip compared to the conventional 5mm housing, making it easier to see the device under test and making it ideal for measurements of SMT components.

Resistance at probe tip 10MΩ
Capacitance at probe tip 9.5pF
Scope input impedance 1MΩ
Bandwidth (3dB) DC to 350MHz
Maximum working voltage 300 V RMS CAT II
Rise time (10% to 90%) 1ns
Compensation range 10 to 25 pF
Compatible with PicoScope PicoScope 6402A/B/C/D, 6403A/B/C/D
Cable length 1.3m

Supplied with

Coding rings (set) 3x4 colours; ground blade; ground lead 15cm; ground spring; insulating cap; sprung hook; trim tool.

Passive Oscilloscope Probes

Note

All the products in this range are supplied for use with instruments with a permanent earth connection.

Specifications
Attribute Value
Probe Type Passive
Attenuation 1:10
Bandwidth 350MHz
Connector Type BNC
Number of Probes 1
Safety Category Level CAT II
Rise Time 1ns
Available to back order for despatch 03/01/2020
Price Each
£ 139.00
(exc. VAT)
£ 166.80
(inc. VAT)
Units
Per unit
1 +
£139.00
Related Products
The RS Pro RS-HF 612RA passive oscilloscope probe ...
Description:
The RS Pro RS-HF 612RA passive oscilloscope probe belongs to a new series of high performance 2.5mm diameter probes. This probe offer 500 MHz bandwidth and has a fixed attenuation of 10:1. In addition, this model is equipped with a readout actuator pin on the BNC connector.The compact design is ...
Solves three longstanding problems by providing: lower DUT ...
Description:
Solves three longstanding problems by providing: lower DUT loading (≤1 pF/1 MΩ probe loading); direct and easy access to SMDs; accesses DUT signals and scope bandwidth for TDS600/700/3000/5000/6000/7000*1 and CSA7000 scopes up to 1 GHz bandwidths. Provides the electrical and mechanical performance required for today's digital systems designs. No additional ...
The TPP1000 is a high-bandwidth, general-purpose probe that ...
Description:
The TPP1000 is a high-bandwidth, general-purpose probe that offers breakthrough specifications in its product class. The probe's exceptionally low capacitive loading limits adverse affects on circuits and is more forgiving of longer ground leads. And, with wide bandwidth, users can see the high-frequency components in the signal - which is ...
Description:
The DXC200 is a pair of x1 probes matched for differential measurement applications. The DXC200 is designed to minimise capacitance loading (compared to coaxial cable) while still maintaining practical probe-to-circuit attachment. Full DA1800 series amplifier gain and Common Mode Rejection Ratio (CMRR) are maintained. The full gain capability of the ...