Extended open & fixture time methacrylate adhesive
Superior bond strength and durability
Bond is load bearing & resistant to weathering
Wide temperature range -55°C to +120°C
10-11 minute pot life, fixture time 30-35mins, functional cure 24 hrs
Excellent shear, peel & impact strength
Hydrocarbons; Acids; Bases; Salt Solutions
Excellent environmental and chemical resistance
Non sag

The ITW Devcon 50ml acrylic adhesive is a 2-part structural paste and dispensing system which allows the metering, mixing and accurate application of epoxy and acrylic structural adhesive. It ensures accurate ratio mix, fast application with a predetermined flow rate and reduced waste/mess. It is made of methacrylate. To apply the adhesive, a system of a 1:1 ratio cartridge (in 3 sizes) application gun and static mixing nozzle is required, each is available separately.

• Extended open and fixture time methacrylate adhesive
• Superior bond strength and durability
• Bond is load-bearing and resistant to weathering
• Excellent shear, peel and impact strength
• Hydrocarbons, acids, bases and salt solutions
• Excellent environmental and chemical resistance
• Pot life of 10 to 11 minutes
• Fixture time of 30 to 35 minutes
• Cure time is 24 hrs
• Operating temperature ranges between -55°C and 120°C

• Composite
• Metal
• Plastic

ITW Devcon Structural Adhesives

Two-part structural adhesives and dispensing systems which allows the metering, mixing and accurate application of epoxy and acrylic structural adhesives. They ensure accurate ratio mix, fast application with a predetermined flow rate and reduced waste/mess. To apply the adhesive a system of a 1:1 ratio cartridge (in 3 sizes) application gun and static mixing nozzle is required; each is available separately.