Fast curing clear epoxy adhesive
4 minute pot life
93°C maximum operating temperature
Works down to -40°C when cured

The ITW Devcon 50ml epoxy resin is a 2-part structural compound and dispensing systems which allow the metering, mixing and accurate application of epoxy and acrylic structural adhesives. They ensure accurate ratio mix, fast application with a predetermined flow rate and reduced waste/mess. To apply this adhesive, a system of a 1:1 ratio cartridge (in 3 sizes) application gun and static mixing nozzle is required

• 100% reactive, no solvents
• Good dielectric strength
• Good solvent resistance
•
Fast curing clear epoxy adhesive
• Pot life is 4 minutes
• Setting time is 3 minutes to 6 minutes
• Cure time is 12 hours
• Shear strength of 13MPa
• The operating temperature ranges between -40°C and 93°C

•
Ceramic
• Concrete
• Ferrite
• Ferrous metal
• Non-ferrous metal
• Glass
• Wood

ITW Devcon Structural Adhesives

Two-part structural adhesives and dispensing systems which allows the metering, mixing and accurate application of epoxy and acrylic structural adhesives. They ensure accurate ratio mix, fast application with a predetermined flow rate and reduced waste/mess. To apply the adhesive a system of a 1:1 ratio cartridge (in 3 sizes) application gun and static mixing nozzle is required; each is available separately.