Cynergy3 Process Pump Controller, 250 V ac, IP21

  • RS Stock No. 348-7977
  • Mfr. Part No. FCTE45
  • Brand Cynergy3
Technical Reference
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): IT
Product Details

Pump Protection Switch

Fits to pump body or pipe work (pipe diameter 20 to 200mm)
A rapid rise past the set-point temperature of 45°C (if the inlet water level falls below the centre line of the inlet) of any centrifugal type pump, will cause this device to react.
High power switch cuts off the electrical supply to protect the pump from dry running, seal overheating and other damage
Switch rating: 16A/250V ac
Manual reset restarts the pump
Condition indicator light
Dimensions; H46mm, W46mm, L72mm

Specifications
Attribute Value
Supply Voltage 250 V ac
IP Rating IP21
Maximum Fluid Temperature +45°C
2 In stock for FREE next working day delivery
Price Each
£ 28.19
(exc. VAT)
£ 33.83
(inc. VAT)
Units
Per unit
1 - 4
£28.19
5 - 9
£27.33
10 +
£26.46
Related Products
The VAC2-3/RFI is a compact variable phase-angle regulator ...
Description:
The VAC2-3/RFI is a compact variable phase-angle regulator of open construction and suitable for 230V single-phase operation with mains driven inductive loads, such as induction motors, fans and pumps. An integral choke/capacitor RFI circuit enables the controller to meet current EMC standards for emissions. Infinitely variable 0-98% output Maximum RMS ...
For liquid flow measurement Suitable for high temperature ...
Description:
For liquid flow measurement Suitable for high temperature applications and especially for CIP (Clean-In-Place) systems, industrial washing machines, heating and cooling systems, etc.FDA approved high tech materials with excellent chemical resistances No moving parts in measuring technique Use with insertion-style installation fittings Supply voltage: 18 – 36Vdc Output signal: 4-20mA, ...
Flowline's general purpose range of level controller displays ...
Description:
Flowline's general purpose range of level controller displays which cover an assortment of engineering units. Comes equipped with either a 4-20mA or 0-10mA level sensor inputs, with various configurations to ensure your application is covered. Optional 2 or 4 programmable relays & repeater are available for added functionality. Intuitive setup ...
Pump control, Alternating/parallel. Alternated access of two pumps ...
Description:
Pump control, Alternating/parallel. Alternated access of two pumps or other devices Even distribution of duty Parallel duty at high demand Operation using 1 or 2 input signals (two modes of operation)Timing offset of the two loads to avoid water hammer effcects Supply voltage selectable via TR2 power modules2 separate change ...