onsemi FUSB303TMX, USB Power Switch IC 12-Pin, QFN

The FUSB303 device is a fully autonomous USB Type−C™ controller optimized for 15 W or less applications. The FUSB303 offers CC logic detection for Source Port role, Sink Port role, DRP, and accessory detection support, as well as Dead Battery support as defined in USB−C specifications. The FUSB303 features configurable address I2C access to support multiple ports per system or it can operate autonomously configured by just pins.

Fully Autonomous USB−C™ Port Controller
Supports Latest Type−C™ Specification Release 1.3
Source, Sink, and DRP Port role Configuration with Optional Accessory Support
Try.SRC and Try.SNK modes for Preferring Source Role or Sink Role Respectively
VDD Operating Range, 2.85 V − 5.5 V
Typical Low Power Operation: ICC < 10μA
GPIO and I2C Configuration
Max 28 V DC Tolerance on ID, VBUS_DET, CC1 and CC2
Dead Battery Support (Sink Port role when No Power Applied)
4 kV HBM ESD Protection for Connector Pins