onsemi, Power Factor Pre-Regulator Circuit IC 20 kHz 27-Pin, SPMHC 264 Vrms
- RS Stock No.:
- 181-1879
- Mfr. Part No.:
- FPDB60PH60B
- Brand:
- onsemi
Currently unavailable
We don't know if this item will be back in stock, RS intend to remove it from our range soon.
- RS Stock No.:
- 181-1879
- Mfr. Part No.:
- FPDB60PH60B
- Brand:
- onsemi
Specifications
Technical Reference
Legislation and Compliance
Product Details
Find similar products by selecting one or more attributes.
Select all | Attribute | Value |
|---|---|---|
| Brand | onsemi | |
| Product Type | Power Factor Pre-Regulator Circuit IC | |
| Sub Type | Power Factor Pre-Regulator Circuit | |
| Maximum Sink Current | 5mA | |
| Switching Frequency | 20kHz | |
| Supply Current | 26mA | |
| Zero Power Detection | No | |
| Mount Type | Through Hole | |
| Package Type | SPMHC | |
| Pin Count | 27 | |
| Minimum Supply Voltage | 180Vrms | |
| Maximum Supply Voltage | 264Vrms | |
| Minimum Operating Temperature | -40°C | |
| Width | 27 mm | |
| Standards/Approvals | No | |
| Height | 5.7mm | |
| Length | 44.2mm | |
| Series | FPDB60PH | |
| Maximum Operating Temperature | 150°C | |
| Automotive Standard | No | |
| Select all | ||
|---|---|---|
Brand onsemi | ||
Product Type Power Factor Pre-Regulator Circuit IC | ||
Sub Type Power Factor Pre-Regulator Circuit | ||
Maximum Sink Current 5mA | ||
Switching Frequency 20kHz | ||
Supply Current 26mA | ||
Zero Power Detection No | ||
Mount Type Through Hole | ||
Package Type SPMHC | ||
Pin Count 27 | ||
Minimum Supply Voltage 180Vrms | ||
Maximum Supply Voltage 264Vrms | ||
Minimum Operating Temperature -40°C | ||
Width 27 mm | ||
Standards/Approvals No | ||
Height 5.7mm | ||
Length 44.2mm | ||
Series FPDB60PH | ||
Maximum Operating Temperature 150°C | ||
Automotive Standard No | ||
- COO (Country of Origin):
- CN
The FPDB60PH60B is an advanced PFC SPM® 3 module providing a fully-featured, high-performance Bridgeless PFC (Power Factor Correction) input powerstage for consumer, medical, and industrial applications. These modules integrate optimized gate drive of the built-in IGBTs to minimize EMI and losses, while also providing multiple on-module protection features including under-voltage lockout, over-current shutdown, thermal monitoring, and fault reporting. These modules also feature high-performance output diodes and shunt resistor for additional space savings and mounting convenience.
600 V - 60 A 2-Phase Bridgeless PFC with Integral Gate Driver and Protection
Very Low Thermal Resistance Using AlN DBC Substrate
Built-in NTC Thermistor for Temperature Monitoring
Built-in Shunt Resistor for Current Sensing
Optimized for 20kHz Switching Frequency
Isolation Rating: 2500 Vrms/min.
Motion Control - Home Appliance/Industrial Motor