FESTO ADN series of compact pneumatic cylinder are up to 50% smaller than standard pneumatic cylinders for maximum productivity in confined spaces. These double acting pneumatic actuators have dual connection ports for compressed air to be applied for advancing and retracting the piston rod. The extensive range of stroke length and bore size variants in the ADN series can be configured to suit a broad range of applications.

Pneumatic Cylinder Operation
The ADN series is a double acting actuator with air applied to extend and to retract the piston in a linear motion to the desired stroke length. Magnetic piston rods allow contactless position detection via a proximity sensor mounted in slots along the cylinder body.

Cylinders are fitted with flexible polymer end cushioning helping to reduce noise and vibration, prolong service life and increase production and productivity.

Complies with ISO 21287 standard
Slots for flush mounting proximity sensors
Low friction design allowing for continuous operation
Cushioning requires no adjustment saving maintenance time and cost

The ADN series pneumatic actuators can be mount horizontally or vertically to suit the required application. Optional mounting accessories provide further flexibility allowing the cylinder to be attached with a swivel bracket for free movement, foot mounted for support under high loads or combined with other actuators to give a wider range of movement.

Turn compressed air into linear motion with this pneumatic cylinder from Festo. It's a double-acting unit, meaning there's a port at each end, so air drives the piston rod back and forth, removing the need for a return mechanism. You'll find mounting this device is a breeze thanks to its widely compatible threaded design. A broad operating temperature range between -20°C and +80°C ensures this reliable workmate gets on with the job in demanding conditions.

• Cushioned at both ends to reduce noise and vibration
• High-alloy steel piston rod resists corrosion in damp settings
• Pre-cut slots enable the mounting of the proximity sensor to monitor the piston
• Can be mounted in any position to suit the needs of your setup

• Conveyor systems
• Oil and gas plants
• Food production and packaging

As this component has an operating pressure range between 0.6 and 10 bar, you can rest assured it offers versatile use.

Yes, you can lubricate this device for smoother movement. If you do so, you'll need to keep lubricating it going forward.

FESTO ADN Series