Eaton EASY Series Logic Module for Use with Easy 800, 24 V dc Supply

View this category
Unavailable
RS will no longer stock this product.
RS Stock No.:
478-9870
Mfr. Part No.:
265253 & MFD-CP8-NT
Brand:
Eaton
Find similar products by selecting one or more attributes.
Select all

Brand

Eaton

Manufacturer Series

EASY

For Use With

Easy 800

Supply Voltage

24 V dc

Network Type

EasyNet

Programming Interface

Computer

Length

107.5mm

Depth

29.5mm

Communication Port Type

Serial

Dimensions

107.5 x 90 x 29.5 mm

Number of Communication Ports

1

Mounting Type

DIN Rail

Width

90mm

Maximum Operating Temperature

+55°C

Minimum Operating Temperature

-25°C

RoHS Status: Not Applicable

COO (Country of Origin):
DE

PSU-CPU-Logic Controller Modules


These modules clip directly on the display unit mounting bosses on the rear of the panel
Port for optional EEPROM memory module
Programmed using easy-soft-PRO (see stock no. 478-9937)
24Vdc supply voltage
Dimensions: H90 x W107.5 x D29.5mm

Note

To use this module you will also need a Display Module (typical stock no. 478-9836) and an I/O Module (typical stock no. 478-9886).


Eaton MFD-Titan


The MFD-Titan multi-function display is available as modular components which can be assembled to suit your requirements.,One option is to use a display unit mounted on the front of a panel, coupled directly to a rear of panel PSU-CPU logic controller module (the data and supply lines are coupled through a connector which is integrated within one of the two 22.5mm diameter mounting bosses). With the addition of one of a choice of four clip-on digital and analogue I/O modules, you end up with a panel mounted controller which is equivalent in power and features to an easy800, combined with a flexible HMI.If you need additional I/O, a mounting kit is available which enables one of the digital expansion modules from the easy range to be used as well.,Alternatively, to add a flexible HMI to an easy controller, the display unit can be coupled through the panel to a display repeater module. This in turn is connected to an easy controller using the supplied five metre serial lead, which can be shortened (at the communication module end) if required. Two display repeater modules are available, one suits the easy500 and 700, the other suits the easy800.