Introducing Schneider Electrics digital and analogue input and output modules, they are supplied in die-cast castings for extra durability and are brought to you in either full or half height modules.

Input modules: They receive signals from the sensors and carry out acquisition functions, adaptation functions, galvanic insulation functions, filtering functions and functions protecting against parasitic signals.
Output modules: They carry out latch functions on the orders given by the processor to enable pre-actuator control through decoupling circuits and amplification circuits.

• High performance and easy installation
• With the exception of the first slot (that will only accept a full-height module), 1 slot within the Micro PLC rack can accommodate 1 full height module or 2 half height modules. These may be a mix of digital, analogue, safety or AS-i modules
• The 24Vdc input modules have a switch on the card for selecting sink or source mode (PNP/NPN)
• Modules have a removable terminal block or (in the case of the 64-channel module) HE10 connectors
• Using the telefast pre-wired cabling system, the connectors can then be connected to telefast connection bases (which replace panel terminals) via a multi-core cable, available in lengths of 1m, 2m or 3m thus saving hours of wiring time between the PLC and panel terminals

Full Height Modules
• 32 outputs (relay): TSXDSZ32R5
• 16 inputs (24Vdc)/12 outputs (relay): TSXDMZ28DR
• 32 inputs (24Vdc)/32 outputs (24Vdc) or relay when using the telefast system: TSXDMZ64DTK
Half Height modules
• 12 inputs (24Vdc) TSXDEZ12D2
• 8 outputs (relay) TSXDSZ08R5

• Forms part of the Modicon TSX Micro Automation platform
• 16 screw terminal block discrete input number
• Discrete input voltage - 24 V DC, discrete input logic: negative
• Discrete input current is 9 mA
• Resistive load type
• 4.5 W power dissipation