Tektronix TPS2024B TPS2000 Series Digital Bench Oscilloscope, 4 Analogue Channels, 200MHz - RS Calibrated

The TPS2000B Series with IsolatedChannel™ technology provides isolation from ground and isolation between channels, enabling users to take measurements with less worry about damaging circuitry. Applications include advanced electronics and industrial power (design, troubleshooting, installation, maintenance), automotive design & test and education. Battery power comes as standard, making the TPS2000B a natural choice for field applications.

Isolated external trigger
8 hours of continuous battery operation with 2 batteries installed (1 battery supplied)
Batteries hot swappable for virtually unlimited freedom from AC line power
FFT standard
Advanced triggers to quickly capture the event of interest
Traditional, analog-style knobs and multilanguage user interface for easy operation
Quick setup and operation with Autoset menu, Autorange, Waveform and Setup memories, and built-in, context-sensitive Help
Backlit menu buttons for high visibility
11 of the most critical automatic waveform measurements
H x W x D: 161mm (6.33in) x 336mm (13.24in) x 130mm (5.1in)
Instrument weight 2.7kg (6lb), + batteries 0.5kg (1lb) each

Suitable for use with: power bundle TPS2PBND2 712-1145 comprising four P5122 passive, 100X high voltage probes plus power measurement and analysis software TPS2PWR1; power measurement module TPS2PWR1 only 488-1190 ; battery charger TPSCHG 485-1290 ; soft carry case AC2100 481-0845 ; hard carry case HCTEK4321 613-1510 (requires AC2100)

TPP0201 200 MHz, 10X passive probes (1 per channel), 1 Lithium-ion battery (with fuel gauge for 4-hour battery life), USB to RS-232 cable, OpenChoice® PC connectivity software, NI SignalExpress™ Tek Edition software, user manual, AC adapter with power cord, NIM/NIST-Traceable
Certificate of Calibration, front protective cover

The Tektronix TPS2000 series oscilloscope has a bandwidth of 200MHz. It is a 4-channel digital storage oscilloscope which offers isolation from ground and isolation between channels allowing you to take measurements with less worry about damaging circuitry with the help of Isolated Channel™ technology. Battery power comes standard, making it an obvious choice for field applications. For work on power electronics, optional software integrates commonly needed power system measurements into the instrument, speeding up power analysis and troubleshooting.
Note:
Suitable for use with: power bundle TPS2PBND2 712-1145 comprising four P5122 passive, 100X high voltage probes plus power measurement and analysis software TPS2PWR1

Sample rate is 2GSa/s
2.5k point record length on all channels
Input impedance of 1mohm
1/4in VGA LCD colour display
8 hours of continuous battery operation with two batteries installed, hot swappable for virtually unlimited freedom from ac line power
Optional power application software offers the broadest range of power measurements at its price point
Quickly document and analyse measurement results with Open choice® Software or integrated CompactFlash® mass storage
FFT standard on all models
Advanced triggers to quickly capture the event of interest
Traditional, analogue-style knobs and multi-language user interface for easy operation
Quick set-up and operation with auto set menu, auto range, waveform and set-up memories, and built-in, context-sensitive help
Backlit menu buttons for high visibility
11 of the most critical automatic waveform measurements

Industrial power design, troubleshooting, installation and maintenance
Advanced electronics design, troubleshooting, installation and maintenance
Automotive design and test
Education

UL61010-1: 2004 approved
CAN/CSA22.2 No. 1010.1: 2004 approved
EN61010-1: 2001.