Pico Technology PQ217 Probe Holder, For Use With Picoscope 6000E
- RS Stock No.:
- 201-1832
- Mfr. Part No.:
- PQ217
- Brand:
- Pico Technology
Unavailable
RS will no longer stock this product.
- RS Stock No.:
- 201-1832
- Mfr. Part No.:
- PQ217
- Brand:
- Pico Technology
Specifications
Technical Reference
Legislation and Compliance
Product Details
Find similar products by selecting one or more attributes.
Select all | Attribute | Value |
---|---|---|
Brand | Pico Technology | |
Accessory Type | Probe Positioning System | |
For Use With | Picoscope 6000E | |
Select all | ||
---|---|---|
Brand Pico Technology | ||
Accessory Type Probe Positioning System | ||
For Use With Picoscope 6000E | ||
- COO (Country of Origin):
- SE
The Pico Technology PQ217 probe holder and PCB holder kit is a valuable accessory for any BNC-input oscilloscope up to 500 MHz bandwidth. It has been designed exclusively for use with the range of 2.5 mm probes from Pico, of which four P2056 500 MHz probes are included in this kit. Also included in the kit is an A4-sized (about 9" x 11") steel base plate, four PCB holders, four probe holders, and eight colored elastic cable ties.
Your PCB is fixed into place with four powerful magnetic posts employing spring-loaded clamps to grip the PCB under test. The clamps use a pair of replaceable insulating washers to avoid shorting tracks on the PCB.
With strong magnets at their base, the four gooseneck probe holders offer a flexible way to position the probe tip while holding it firmly poised in place. Their unique design employs a precisely weighted probe holder that pushes the sprung probe tip just enough to make a good contact on your PCB or unit under test.
Your PCB is fixed into place with four powerful magnetic posts employing spring-loaded clamps to grip the PCB under test. The clamps use a pair of replaceable insulating washers to avoid shorting tracks on the PCB.
With strong magnets at their base, the four gooseneck probe holders offer a flexible way to position the probe tip while holding it firmly poised in place. Their unique design employs a precisely weighted probe holder that pushes the sprung probe tip just enough to make a good contact on your PCB or unit under test.
Features and benefits
The base plate provides the secure footing for your probe positioning system
It's mirror finished, allowing to see the underside of the PCB to view any status LEDs during test
The probe holders include eight pairs of elastic cable ties in the PicoScope channel colors
It's mirror finished, allowing to see the underside of the PCB to view any status LEDs during test
The probe holders include eight pairs of elastic cable ties in the PicoScope channel colors
Supplied with/Kit contains:
Base plate
4 P2056 500 MHz probes
4 spring-loaded magnetic PCB holder
4 magnetic 2.5 mm oscilloscope probe holder
8 colored elastic cable ties
4 P2056 500 MHz probes
4 spring-loaded magnetic PCB holder
4 magnetic 2.5 mm oscilloscope probe holder
8 colored elastic cable ties
What other Probes are available in this Pico range?
Pico PQ215 probe holder kit without probes
Pico PQ217 Probe holder kit with 4 x P2056 500 MHz probes
Pico PQ219 8-channel probe holder kit for PicoScope 6000E Series
Pico PQ217 Probe holder kit with 4 x P2056 500 MHz probes
Pico PQ219 8-channel probe holder kit for PicoScope 6000E Series
Related links
- Pico Technology PQ218 Probe Holder, For Use With Picoscope 6000E
- Pico Technology PQ215 Probe Holder, For Use With Picoscope 6000E
- Pico Technology PQ219 Probe Holder, For Use With Picoscope 6000E
- Pico Technology PQ215 Probe Holder, For Use With PicoScope 6000E Series
- Pico Technology PQ219 Probe Holder, For Use With PicoScope 6000E Series
- Pico Technology TA102 Probe Holder, For Use With All Types of Passive Probes
- Pico Technology TA328 Sprung Hook, For Use With PicoScope 4444 Differential Oscilloscope
- Pico Technology TA327 Sprung Hook, For Use With PicoScope 4444 Differential Oscilloscope