Fluke Networks Cable Tester RJ45, LIQ-100-IE

Troubleshooting existing LAN connections or installing new ones? This network cable tester from FLUKE reliably checks wires of up to 305m to keep your setup efficient. It's a versatile device that identifies mis-wires and split pairs on your RJ45, M12X, M12D and M8D terminations. To give you a detailed understanding of your setup, the instrument tracks data transmission performance between 10Mb/s and 10Gb/s. Simply install and link the tester to your computer with the LinkWare software to print out results and reports. You can trust it delivers glitch-free performance in a wide temperature range between 0°C and +45°C.

• 8-hour battery life sees you through longer jobs
• Weighs just 624g, so it's easy to carry on the go
• Blinking light indicates which port is connected for ease of use
• RJ45 fitting is widely compatible with standard connections

• Industrial control operations
• Internal office networks
• Healthcare facilities
• Schools
• Warehouses

The device tests EtherNet/IP, PROFINET, EtherCAT and other industrial Ethernet protocols. This means you can use it to perform ping tests to confirm connectivity and check data transfer rates. It also verifies switch names, port numbers and VLAN information.

’Buy a Fluke, Get one Free’ is back!!
Between March 1st, 2024 and August 31st, 2024, the customer spends £150 or more on a qualifying Fluke product (Fluke Industrial, Fluke Calibration, Fluke Networks, or Beha-Amprobe).
Customer claims their tool online at: www.fluke.co.uk/freefluke
A proof of purchase in the form of a receipt or invoice is required.