Fluke I410 Multimeter Current Clamp Adapter, 400A, 400A ac, 30mm

  • RS Stock No. 237-4218
  • Mfr. Part No. i410
  • Brand Fluke
Technical Reference
Legislation and Compliance
RoHS Status: Not Applicable
COO (Country of Origin): TH
Product Details

Fluke Current Probes

Rugged current clamp adaptor suitable for use with multimeters to give non intrusive measurement of d.c. and a.c. current. Integral 1.2m 4mm shrouded plug lead.

Jaws accept conductor size of 1 x 30mm or 2 x 25mm dia.
d.c. current zero control for nulling out jaw/sensor offset
Superior noise immunity allows measurement in electrically noisy environments, such as adjustable speed drive line-side and load currents
Shielded, heat-resistant silicon rubber cable connects clamp to digital multimeter
Battery check mode
Compatible with meter input impedance ≥1MΩ
Conforms to IEC 1010-1 Cat III 600V

Supplied With: 9V PP3 alkaline battery and operators manual.

Buy Fluke products and claim another Fluke product free.
Between September 1, 2020 and December 15, 2020 customer who purchase a Fluke product (inc. Fluke Networks) have the opportunity to claim a free product through the Fluke website with the original proof of purchase, invoice, or receipt. The product can be claimed by visiting the Fluke website - www.fluke.co.uk/freefluke. There are six levels of free tools to claim. They are separated based on the value of the qualifying purchase, starting at as little as only £100. For each level there is a fixed range of products to claim, based on the value of the original purchase.

Specifications
Attribute Value
Adapter Type AC/DC
Maximum DC Current 400A
Maximum AC Current 400A ac
Best Accuracy ±3.5% + 0.5 A
Maximum Conductor Size 30mm
Safety Category CAT III 600 V
Output Type Voltage
Connector Type 4 mm Plug
Battery Type 9V
Battery Life 60 h
Maximum Operating Temperature +50°C
Minimum Operating Temperature -10°C
Model Number p I410
Safety Category Level CAT III
Safety Category Voltage 600V
7 In stock - FREE next working day delivery available
Price Each
£ 245.00
(exc. VAT)
£ 294.00
(inc. VAT)
Units
Per unit
1 +
£245.00
Calibration Options:
Related Products
Small but mighty, Druck's UPS III loop calibrator ...
Description:
Small but mighty, Druck's UPS III loop calibrator offers maximum results with a compact design. The calibrator forms part of an essential toolbox that one may need for calibration and troubleshooting, instrument maintenance and valve set-up. Druck's loop calibrator offers a wealth of time-saving features, all made possible through the ...
Wide input voltage range Regulated output Input protected ...
Description:
Wide input voltage range Regulated output Input protected against reverse polarity Input fuse protection Ouput overvoltage protection EMC to EN50081-1/50082-112Vdc and 24Vdc input types are 'E' approved for vehicle applications. 27W to 276W Linear & Switch Mode, DC to DC Battery Voltage Converters.
Low wear friction drive provides improved service life/resistance ...
Description:
Low wear friction drive provides improved service life/resistance to vibration Pressure compensating valve prevents condensation High impact resistance to 20 Joules IP 65 rating Mounting and connection without the need to disassemble the mechanism Lens, cable sealing gland & halogen bulb included. Rotating Mirror Beacon - 883 Series.
ICA39T from the RS Pro range of current ...
Description:
ICA39T from the RS Pro range of current clamp adapters. 1.9% basic D CA / A CA accuracy Non-intrusive transducing Up to 29 mm Diameter conductor Shock Proof: 5 ft drop Coiled cable output plugs Ergonomically designed jaw and trigger AC-DC 1000 A capability Auto-zero key for DCARed LED - ...