Schneider Electric TeSys Communication Module, 500 mA

Regulate the startup of your electric motors using this advanced motor starter from Schneider Electric. It acts as a communication module that relays set voltage and current parameters to the machine. A simple plug-in design lets you mount the device in a control cabinet without the need for complex wiring. It has three LED indicators that show its operating status for quick configuration and diagnosis. You can also connect it to a PLC from the Advantys STB range using a firewire cable to enhance its performance.

• Wide operating temperature range between -25°C and +55°C for safe use in harsh industrial environments
• IP20 rating means it's finger-safe and protected against solid objects over 12mm
• Transmission rate of 800kbit/s for reliably rapid data transfer

• Industrial pumps
• Heating, ventilation and air-conditioning systems
• Conveyor belts
• Oil and gas industry

This versatile device uses standard CAN2.B and CAN2.0A communication port protocols for easy signal transmission between multiple devices.

The TeSys U is a modular system for motor control; it enables the user to create a customised solution for their control requirements, from a series of standard modules. The plug-in modules allow the assembly and wiring before the selection of motor protection parameters and control voltages, they can be created or changed in seconds by changing the plug-in modules. A host of DOL starting applications can be catered for.

First choose a Power Base- 12A or 32A, direct on line or reversing. The power base includes 2 auxiliary contacts.
Then choose the plug-in protection module by motor full load current and control voltage required.
Additional plug in functions can be selected and added at any time.
The plug-in bases can use any LU9 type blocks see stock no. 493-8779 for base option