STMicroelectronics X-NUCLEO-IHM11M1 Motor Configuration BLDC Expansion Board for STSPIN230 for STM32 Nucleo

Technical Reference
Legislation and Compliance
RoHS Certificate of Compliance
Product Details

X-NUCLEO-IHM11M1 BLDC Motor Driver Expansion Board

The X-NUCLEO-IHM11M1 is a low-voltage three-phase brushless DC (BLDC) motor driver expansion board based on the STSPIN230 triple half-bridge chip. The device is designed for battery-powered applications and can be forced into a zero-consumption state, yielding a significant increase in battery life.

• Operating voltage range: +1.8 to +10Vdc • Output current: 1.3Arms
• Current control with adjustable off-time
• Standby consumption: <80nA
• Non-dissipative over-current detection and protection
• Over-temperature protection
• Interlocking function
• Hall/Encoder motor sensor connector and circuit
• 3 x Output activity LEDs
• Fault LED
• Potentiometer for manual speed control
• Screw terminals for motor signals and power supply
• ST morpho connectors for host MCU board
• Arduino Uno r3 compatible Shield headers
• Compatible with STM32 Nucleo MCU boards
• Compatible with ST Six Step or ST FOC control algorithms

Motor Controllers & Drivers, STMicroelectronics

Specifications
Attribute Value
Kit Name Motor Configuration
Kit Classification Expansion Board
For Use With STM32 Nucleo
Motor Type BLDC
Featured Device STSPIN230
Available to back order for despatch 04/08/2020
Price Each
£ 8.05
(exc. VAT)
£ 9.66
(inc. VAT)
Units
Per unit
1 +
£8.05
Related Products
Description:
The Haptic click is an add-on board that driver ERM (Eccentric Rotating Mass) and LRA (Linear Resonant Actuator) vibration motors. A Motor Haptic Driver (Texas Instruments DRV2605L) includes a haptic-effect library with over 100 haptic effects. Audio interface (3.5 mm jack) for audio-to-vibe effects Screw terminals for connecting ERM and ...
Description:
The Stepper 3 click is an add-on board that driver unipolar stepper motors with precise controls. A high-voltage, high-current Darlington Transistor Array (Texas Instruments ULN2003A) operates the motor windings. Individual motor phases can be accessed separately External motor power supply up to 30 V dc capable of 500 mA (single ...
The Brushless click is an add-on board that ...
Description:
The Brushless click is an add-on board that drives 3-phase full-wave Brushless DC motors. A PWM Sensorless Controller IC (Toshiba TB6575FNG), controls the rotation speed. External motor power supply 7 to 32 V dc capable of 2 APulse Width Modulation (PWM) pin for duty cycle control interface INT pin for ...
The STEVAL-IHM029V2 is a low-cost universal motor control ...
Description:
The STEVAL-IHM029V2 is a low-cost universal motor control evaluation board designed for the home appliance market, with particular focus on vacuum cleaners, food processors and power tools. This system features the 20-pin, 8-bit STM8S103F2 microcontroller running at 16 MHz (user-trimmable internal RC clock), featuring 4 KB of Flash memory, a ...