SICK MPS Series Position Sensor 30V dc
- RS Stock No.:
- 786-5829
- Mfr. Part No.:
- MPS-160TSTP0 / 1050685
- Brand:
- SICK
Subtotal (1 unit)*
£305.75
(exc. VAT)
£366.90
(inc. VAT)
FREE delivery for orders over £60.00
In Stock
- Plus 4 unit(s) shipping from 04 May 2026
Need more? Click ‘Check delivery dates’ to find extra stock and lead times.
Units | Per unit |
|---|---|
| 1 + | £305.75 |
*price indicative
- RS Stock No.:
- 786-5829
- Mfr. Part No.:
- MPS-160TSTP0 / 1050685
- Brand:
- SICK
Specifications
Technical Reference
Legislation and Compliance
Product Details
Find similar products by selecting one or more attributes.
Select all | Attribute | Value |
|---|---|---|
| Brand | SICK | |
| Product Type | Position Sensor | |
| Series | MPS | |
| IP Rating | IP67 | |
| Terminal Type | 4-Pin M8 Connector | |
| Maximum Supply Voltage | 30V dc | |
| Minimum Operating Temperature | -20°C | |
| Overall Depth | 14.2mm | |
| Overall Width | 13.6mm | |
| Overall Height | 173mm | |
| Standards/Approvals | RoHS | |
| Maximum Operating Temperature | 70°C | |
| Mount Type | Drop-In | |
| Select all | ||
|---|---|---|
Brand SICK | ||
Product Type Position Sensor | ||
Series MPS | ||
IP Rating IP67 | ||
Terminal Type 4-Pin M8 Connector | ||
Maximum Supply Voltage 30V dc | ||
Minimum Operating Temperature -20°C | ||
Overall Depth 14.2mm | ||
Overall Width 13.6mm | ||
Overall Height 173mm | ||
Standards/Approvals RoHS | ||
Maximum Operating Temperature 70°C | ||
Mount Type Drop-In | ||
SICK MPS Series Position Sensor, IP67, 30V Maximum Supply Voltage - MPS-160TSTP0 / 1050685
This position sensor provides continuous linear position measurement for pneumatic and profile cylinders in automation environments. It delivers an analogue output for integration with control systems and is designed for use where a sealed enclosure and straightforward electrical connection are required.
Features & Benefits
• Analogue voltage or current outputs enable direct PLC interfacing
• Operating supply range up to 30V supports industrial installations
• IP67-rated enclosure allows use in washdown or dusty environments
• Built-in teach-in simplifies on-site calibration and setup
• Typical resolution 0.03% FSR yields fine position discrimination
• Repeat accuracy 0.06% FSR ensures consistent measurement over cycles
• Operating supply range up to 30V supports industrial installations
• IP67-rated enclosure allows use in washdown or dusty environments
• Built-in teach-in simplifies on-site calibration and setup
• Typical resolution 0.03% FSR yields fine position discrimination
• Repeat accuracy 0.06% FSR ensures consistent measurement over cycles
**Applications**
• Suitable for piston position feedback on T-slot cylinders
• Ideal for integrating with SMC rail-guided actuators
• Used with dovetail groove cylinders for position monitoring
• Can be used for stroke measurement in profile and tie-rod cylinders
• Suitable for machine control requiring analogue displacement signals
• Ideal for integrating with SMC rail-guided actuators
• Used with dovetail groove cylinders for position monitoring
• Can be used for stroke measurement in profile and tie-rod cylinders
• Suitable for machine control requiring analogue displacement signals
What indicator informs about device status during operation?
A front-mounted LED provides immediate operational status and fault indication.
How is the sensor connected electrically in installations?
It uses a four-wire DC connection via an axial cable outlet with an M8 4-pin connector.
What environmental stresses can it withstand mechanically?
The unit tolerates shock up to 30g for 11ms and vibration from 10–55 Hz at 1mm amplitude.
How quickly does the output respond to position changes?
The sensor samples at approximately 1ms intervals, enabling Rapid feedback.
Are there limitations on cable handling in low temperatures?
The attached PUR cable must not be bent below 0°C to avoid damage.