Renesas Electronics, 32bit, RX71M Microcontroller, 240MHz, 4 MB Flash, 176-Pin LFBGA
- RS Stock No.:
- 126-2512
- Mfr. Part No.:
- R5F571MLCDBG#20
- Brand:
- Renesas Electronics
Currently unavailable
We don’t know if this item will be back in stock, it is being discontinued by the manufacturer.
- RS Stock No.:
- 126-2512
- Mfr. Part No.:
- R5F571MLCDBG#20
- Brand:
- Renesas Electronics
Specifications
Technical Reference
Legislation and Compliance
Product Details
Find similar products by selecting one or more attributes.
Select all | Attribute | Value |
|---|---|---|
| Brand | Renesas Electronics | |
| Family Name | RX71M | |
| Package Type | LFBGA | |
| Mounting Type | Surface Mount | |
| Pin Count | 176 | |
| Data Bus Width | 32bit | |
| Program Memory Size | 4 MB | |
| Maximum Frequency | 240MHz | |
| RAM Size | 512 kB | |
| USB Channels | 1 | |
| Typical Operating Supply Voltage | 2.7 → 3.6 V | |
| Length | 13mm | |
| ADCs | 29 x 12 bit | |
| Height | 0.95mm | |
| Width | 13mm | |
| Maximum Operating Temperature | +85 °C | |
| Program Memory Type | Flash | |
| Number of ADC Units | 1 | |
| Dimensions | 13 x 13 x 0.95mm | |
| Instruction Set Architecture | CISC Harvard | |
| Minimum Operating Temperature | -40 °C | |
Select all | ||
|---|---|---|
Brand Renesas Electronics | ||
Family Name RX71M | ||
Package Type LFBGA | ||
Mounting Type Surface Mount | ||
Pin Count 176 | ||
Data Bus Width 32bit | ||
Program Memory Size 4 MB | ||
Maximum Frequency 240MHz | ||
RAM Size 512 kB | ||
USB Channels 1 | ||
Typical Operating Supply Voltage 2.7 → 3.6 V | ||
Length 13mm | ||
ADCs 29 x 12 bit | ||
Height 0.95mm | ||
Width 13mm | ||
Maximum Operating Temperature +85 °C | ||
Program Memory Type Flash | ||
Number of ADC Units 1 | ||
Dimensions 13 x 13 x 0.95mm | ||
Instruction Set Architecture CISC Harvard | ||
Minimum Operating Temperature -40 °C | ||
- COO (Country of Origin):
- JP
RX71M Microcontrollers
The RX71M family of 32-bit microcontrollers features 240MHz (1044 CoreMark) high-speed operation, large-capacity on-chip memory and a large range of peripherals and interfaces.
• 240MHz 32-bit RXv2 core microcontroller
• Up to 4MB Flash memory
• 64KB Data Flash memory
• 552KB RAM (512KB Parity, 32KB ECC, 8KB Standby)
• External address space
• 32-bit multiplier/divider with multiply-accumulate
• Single-precision IEEE 754 Floating Point maths unit
• Operating Modes: Single-chip, SCI-Boot, USB-Boot
• Memory Protection Unit
• Trusted Memory Function
• Register Write Protection
• Data Encryption Modules (AES, DES, SHA, RNG)
• 8-channel DMA Controller
• Data Transfer Controller
• Event Link Controller
• Parallel Data Capture Unit
• Serial Communication: SPI, QSPI, I²C, USB, SD Host, MMC Host, CAN, Ethernet
• Serial Sound Interface
• Sampling Rate Converter
• Programmable Pulse Generator
• 4-channel PWM Timer
• Real-Time Clock
• 14-bit Independent Watchdog Timer
• CRC Calculator
• Data Operation Circuit
• Clock Frequency Accuracy Measurement Circuit
• Temperature sensor
• On-chip Debug and Trace: E1 and E20 Emulators
• Power supply: +2.7 to +3.6Vdc (+3.0 to +3.6V when using USB)
• Low-Power Modes: Sleep, All-module clock stop, Software standby, Deep software standby
• Up to 4MB Flash memory
• 64KB Data Flash memory
• 552KB RAM (512KB Parity, 32KB ECC, 8KB Standby)
• External address space
• 32-bit multiplier/divider with multiply-accumulate
• Single-precision IEEE 754 Floating Point maths unit
• Operating Modes: Single-chip, SCI-Boot, USB-Boot
• Memory Protection Unit
• Trusted Memory Function
• Register Write Protection
• Data Encryption Modules (AES, DES, SHA, RNG)
• 8-channel DMA Controller
• Data Transfer Controller
• Event Link Controller
• Parallel Data Capture Unit
• Serial Communication: SPI, QSPI, I²C, USB, SD Host, MMC Host, CAN, Ethernet
• Serial Sound Interface
• Sampling Rate Converter
• Programmable Pulse Generator
• 4-channel PWM Timer
• Real-Time Clock
• 14-bit Independent Watchdog Timer
• CRC Calculator
• Data Operation Circuit
• Clock Frequency Accuracy Measurement Circuit
• Temperature sensor
• On-chip Debug and Trace: E1 and E20 Emulators
• Power supply: +2.7 to +3.6Vdc (+3.0 to +3.6V when using USB)
• Low-Power Modes: Sleep, All-module clock stop, Software standby, Deep software standby