ATMI SOLIBA Series Tilt Level Switch Level Switch, Cable, ATEX-Rated, Housing Copolymer Polypropylene
- RS-stocknr.:
- 208-5496
- Fabrikantnummer:
- SOLIBA10M
- Fabrikant:
- ATMI
Subtotaal (1 eenheid)*
€ 235,61
(excl. BTW)
€ 285,09
(incl. BTW)
GRATIS bezorging voor bestellingen van meer dan € 90,00
Op voorraad
- 4 stuk(s) klaar voor verzending vanaf een andere locatie
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks | Per stuk |
|---|---|
| 1 + | € 235,61 |
*prijsindicatie
- RS-stocknr.:
- 208-5496
- Fabrikantnummer:
- SOLIBA10M
- Fabrikant:
- ATMI
Specificaties
Datasheets
Wetgeving en compliance
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | ATMI | |
| Device Type | Tilt Level Switch | |
| Product Type | Level Switch | |
| Mount Type | Cable | |
| Housing Material | Copolymer Polypropylene | |
| Cable Length | 10m | |
| Minimum Operating Temperature | 85°C | |
| Maximum Operating Temperature | 85°C | |
| Maximum DC Voltage | 250V dc | |
| Maximum AC Voltage | 250V ac | |
| Standards/Approvals | No | |
| Hazardous Area Certification | ATEX | |
| Series | SOLIBA | |
| Alles selecteren | ||
|---|---|---|
Merk ATMI | ||
Device Type Tilt Level Switch | ||
Product Type Level Switch | ||
Mount Type Cable | ||
Housing Material Copolymer Polypropylene | ||
Cable Length 10m | ||
Minimum Operating Temperature 85°C | ||
Maximum Operating Temperature 85°C | ||
Maximum DC Voltage 250V dc | ||
Maximum AC Voltage 250V ac | ||
Standards/Approvals No | ||
Hazardous Area Certification ATEX | ||
Series SOLIBA | ||
- Land van herkomst:
- FR
This tilt level switch has been designed to provide high level measurement in silos or any other type of storage containers located in non-hazardous areas.
Its operation is very simple: Vertically suspended at the desired high level point, the SOLIBA will tilt as the grain reaches the unit.
To secure your facilities at a minimum cost, the installation of a SOLIBA high level mechanical tilt level switch is strongly recommended, even if your facilities are already equipped with other types of equipment such as: rotating paddles, vibrating forks, radars, capacitive and ultrasonic sensors, etc.
The SOLIBA tilt level switch only operates when the high level is reached, unlike other types of level measurement devices that operate permanently
The tilt level switch must be installed at the opposite side of the arrival of grain and at a certain distance from the silo walls. This to ensure an optimal tilting operation.
Cut out power 20A
Maximum temperature 85 °C
Protection index IP68