RS PRO5.5 V RGB LED 3535 SMD

The ILPL-K301-RGB1-SK105-01 is an Intelligent LED with control and light emitting circuit, all contained in a 3535 sized package.Based on the industry standard SK6182 device, the control circuit consists of signal shaping amplification, built-in constant current source, and a high precision RC oscillator.The data protocol being used is the unipolar NRZ communication mode, where the 24-bit data is transmitted from the controller to DIN of the first LED, after an internal data latch, the remaining data is passed through the internal amplification circuit and sent out of the DO port to the remaining pixels. Using ’automatic shaping forwarding technology’ means the number of cascaded LEDs is only limited by the signal transmission speed.

Control circuit and the RGB die all in one 3535 sized device
Grey level adjusting control (256 level grey scale)
Red drive special control enhances colour balance
Transmission distance between two points can be up to 10M
Using a typical data transmission frequency of 800 Kbps, you can achieve refresh rates of 30 frames per sec
Applications
Task Lighting
Back Lighting
Desk Lighting
Garage Lighting
Accent Lighting
Under Cabinet Lighting
Bar Lighting
Refrigeration
Industrial Applications
Photography