Knightsbridge LEDDIMMER LED Dimmer for use with Flat & Triangular LED Strip

Technical Reference
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): CN
Product Details

Ultra Thin Linear LED Lighting

These compact linear LED lighting strips have a flat slimline cross-section. They are suitable for use in home, office, under kitchen cabinets, shelves, display cases. They are easy to install (two metal mounting clips and screws included). These LED strips utilise high brightness surface mounted LED chips and are available in either cool or warm white light and run on low voltage (24 V) for safety and produce no RF interference and operate silently.

LED strips can be linked (up to 36W per run) with connectors or cable (one cable and one linear connector is supplied with each LED strip). A right angled connector is available as an extra (see RS 719-3156). Power supply is required, a 36W 24V switching power adapter is available (see RS 739-3510).

To further extend the LED striplight reach, use interconnect power leads (available separately) in a choice of lengths:
739-3514 100mm
739-3526 250mm
739-3523 1000mm
739-3520 2500mm

Also these LED strips are dimmable when used with dimmer (see RS 719-3168). This dimmer also has a memory function. To connect multiple LED strips in different arrangements an 8-way DC splitter is also available (see RS 719-3165).

Supplied with

2 metal mounting clips, screws, one connector cable and one linear connector

Specifications
Attribute Value
Accessory Type LED Dimmer
For Use With Flat & Triangular LED Strip
15 In stock for FREE next working day delivery
Price Each
£ 16.92
(exc. VAT)
£ 20.30
(inc. VAT)
Units
Per unit
1 +
£16.92
Related Products
This Bodo Ehmann LED cord dimmer switch is ...
Description:
This Bodo Ehmann LED cord dimmer switch is silent, and can be fitted to most light fixtures through a universal connection. There are no standby consumption thanks to a real on/off switch saving energy and the sliding dimmer control. The minimum and maximum brightness can be adjusted in wide ranges, ...
Ready-for-use resistor to set output current valueCompatible with ...
Description:
Ready-for-use resistor to set output current valueCompatible with LED Driver featuring I-select 2 interface, not compatible with I-select (generation 1)Resistor is base isolatedResistor power 0.25 WCurrent tolerance ± 2 % additional to output current toleranceCompatible with LED Driver series PRE and EXC.
The Recom REDIM Triac Dimmer reliably operates with ...
Description:
The Recom REDIM Triac Dimmer reliably operates with low input power. These Dimmers are ideally matched to the RECOM RACT20 LED drivers series and provide a smooth dimming curve and deep dimming down to zero. The Triac Dimmer is designed for installation in mounting boxes which meet DIN 49073. The ...
The Recom RELI-DA01/R signal converter is an essential ...
Description:
The Recom RELI-DA01/R signal converter is an essential link between dimmable LED drivers and DALI components from devices like switches, dimmers and sensors. The converter communicates with the DALI controller, receives commands and converts into PWM, 0-10V or 1-10V signals. The control output can hold up to 6 LED drivers ...