Get signals on the move through your automated setup in a flash with this interface module from Phoenix Contact. By directly linking a control system to its hardware, the device gets process signals to the work field without a snag. As it has a 50-pin D-sub connector, you get easy plug-and-play connectivity for speedy appliance-swapping. Wear and tear is no problem, thanks to durable PA housing that shrugs off bumps and scratches.
Compact dimensions of 98.2 (W) x 69 (H) x 62mm (D) mean the block slots into standard enclosures without any problem. It clips directly onto a DIN rail, so mounting is done in a flash, without tools. Wiring is equally simple, thanks to easy screw terminals. As the unit takes conductors sized between 0.2 and 4mm², it's a versatile option for use with standard cabling.

• Tested to IEC 60664 standards, so you can be sure of reliable electrical insulation
• UL 94-V0 flammability rating means it self-extinguishes in less than 10 seconds to stop flames from spreading
• Labelled terminals for easy identification of connections
• Performs reliably in an operating temperature range between -20°C and +50°C