Megger MIT310A, Insulation Tester 1000V dc 999mΩ CAT III 600 V UKAS Calibration

  • RS Stock No. 516-9176
  • Mfr. Part No. MIT310A
  • Brand Megger
Technical Reference
Legislation and Compliance
RoHS Status: Not Applicable
COO (Country of Origin): GB
Product Details

MIT 300 Series Insulation & Continuity Testers

A range of insulation testers that meet the relevant requirements of EN61557, BS7671, HD 384, IEC 364 and VDE 0413 for applications in all aspects of electrical contracting, building maintenance, testing, inspection and servicing.

20mm LCD display with true analogue response
Tough rubber armoured case with self contained display cover that locks away underneath the instrument during use
Designed to hang comfortably around the neck for hands-free, or for bench use
Automatic 200mA fast continuity test on connection to the circuit
Lead resistance nulling on continuity allows for use of fused test probes
Automatic discharge of circuit under test
Safety input terminal interlock - prevents unsafe connection of test leads
Intelligent Safety System - even if connected to a live circuit whilst on continuity setting the tester will remain safe and undamaged
Live voltage warning alerts the operator when a circuit voltage over 25V exists when insulation testing
Safety lockout prevents the test from operating when the circuit voltage is > 50V
Continuity check - prevents a continuity test or buzzer test on a live circuit
3 phase safe - will not be damaged if connected across phases
Locking test button
Meets the requirement of BS EN 61010-1 for safe connection to a 440V Installation Category III supply (600V Phase to Earth)
IP54

MIT310A

Moving coil display

MIT320 benefits from the following additional features:

Backlit display and range selection ideal for low light environment
Selectable insulation alarm limit for fast go - no go testing
Selectable continuity alarm limit for fast go - no go testing
Resistance measurement range to 1 MΩ
SP3 switched probe supplied for one handed operation
SP1000 illuminated switched probe with ultra-bright LED light available separately

Note

RS is an authorised Megger distributor. Purchased though RS this product is eligible for the Megger extended 3 Year warranty

Supplied with

instructions, 2 wire test lead set with crocodile clips, 8 x AA alkaline batteries, neck strap & carry case.

Specifications
Attribute Value
Tester Type Insulation & Continuity Tester
Minimum Test Voltage 250V
Maximum Test Voltage 1000V dc
Maximum Insulation Resistance Measurement 999mΩ
Display Type Analogue
Calibrated UKAS
Test Current 1mA
Battery Life 5000 5-Second Tests
Minimum Operating Temperature -10°C
Maximum Operating Temperature +60°C
Power Source Battery
Safety Category Level CAT III
Safety Category Voltage 600V
Safety Category CAT III 600 V
Width 148mm
Length 203mm
Plug Type Type G - British 3-pin
Battery Type AA
Dimensions 203 x 148 x 78mm
Model Number p MIT310A
Height 78mm
Weight 980g
5 In stock for delivery within 2 working days
Price Each
£ 504.00
(exc. VAT)
£ 604.80
(inc. VAT)
Units
Per unit
1 +
£504.00
Not available for guaranteed pre 9am/10am delivery
Related Products
Test box designed to provide confirmation that electrical ...
Description:
Test box designed to provide confirmation that electrical installation testers continue to operate properly, and maintain their accuracy and consistency between calibrations. Tests the full range of a testers capability.Does not trip RCD protected circuits.Tests to regulations BS7671, BS EN61557 & IEE On-Site Guide.Checks insulation, continuity, loop, PFC & RCD ...
MIT480 mk2 Series insulation & continuity testers replace ...
Description:
MIT480 mk2 Series insulation & continuity testers replace the original MIT480 range. Designed for the Telecommunication and Cable testing markets. The tester features a redesigned case, back-stand and 6 cell battery compartment with separate fuse access. Insulation testing up to 500 V and 100 GΩ range in a hand held ...
Insulation resistance testers are used to ensure the ...
Description:
Insulation resistance testers are used to ensure the insulation of wiring is safe, or undamaged after electrical work has been carried out. Testers or megohmmeters are vital in preventing tripped fuses, electrical equipment and instrument breakdown, risk of electric shock or fires.RS5505 is a great value digital insulation tester and ...
The MIT300, MIT310 and MIT320 testers all feature ...
Description:
The MIT300, MIT310 and MIT320 testers all feature an analogue / digital display.Large characters (height 20 mm) provide a clear readout, and a graduated dial simulates the operation of an analogue instrument, thus giving a true analogue response.The MIT310A has a moving display for those who prefer a real moving ...