ITT Cannon Circular Connector, 19 Contacts, Cable, Standard Connector, Plug, Male, IP67, Trident Neptune Series

Neptune

Based on the Trident Ringlok series, the Neptune range combines power and signal contacts. Widely used in automotive, marine and process control industries, they feature a strong bayonet coupling system with standard and reversed pin/socket combinations. A wide selection of backshell accessories, rear housings and dust caps are available., To maintain IP67 rating the rear of the connectors have a rubber seal which is pierced upon contact insertion. The seal is held in place by a screw ring (as supplied) which may be replaced with the appropriate size backshell. For IP67 rating to be maintained, wire insulation diameters should be within the following diameters: Signal wires: 1.7 to 2.7mm, Power wires: 2.7 to 4.0mm. The number of contacts shown as power/signal e.g. 2//13.

Note:

Cable mount plugs only mate with panel sockets and cable mount sockets mate with panel plugs. Plugs accept pin contacts, Sockets accept socket contacts.

Shell size is 16

Crimp termination method

Robust and cost-effective design

Water submersible

Durability of 500 mating cycles

Mixes signal and 30A power contacts in one housing

Full interface and cable sealing

Operation temperature ranging between -55°C and 105°C

Truck and bus

Agricultural equipment

Construction equipment

Printing machines

Industrial automation

Stamping machines

UL approved