E5 Filament Indicator Lamp, Clear, 6.5 V, 150 mA, 2500h
- RS Stock No.:
- 586-087
- Brand:
- NEUTRAL
Image representative of range
Currently unavailable
We don’t know if this item will be back in stock, it is being discontinued by the manufacturer.
Alternative
RS PRO E5 Indicator Light, Clear, 6.5 V, 150 mA, 2500h
£1.248
Each (In a Pack of 10)
RS Stock No.: 104-575
Alternative
This product is not currently available. Here is our alternative recommendation.
Each (In a Pack of 10)
£0.858
(exc. VAT)
£1.03
(inc. VAT)
- RS Stock No.:
- 586-087
- Brand:
- NEUTRAL
Specifications
Technical Reference
Legislation and Compliance
Product Details
Find similar products by selecting one or more attributes.
Select all | Attribute | Value |
|---|---|---|
| Brand | NEUTRAL | |
| Voltage Rating | 6.5 V | |
| Lamp Base | E5 | |
| Current Rating | 150 mA | |
| Diameter | 5.25mm | |
| Lamp Size | T1 1/2 | |
| Length | 16 mm | |
| Lens Colour | Clear | |
| Luminosity | 4 lm | |
| Life Hours | 2500h | |
Select all | ||
|---|---|---|
Brand NEUTRAL | ||
Voltage Rating 6.5 V | ||
Lamp Base E5 | ||
Current Rating 150 mA | ||
Diameter 5.25mm | ||
Lamp Size T1 1/2 | ||
Length 16 mm | ||
Lens Colour Clear | ||
Luminosity 4 lm | ||
Life Hours 2500h | ||
T-1 (5mm) & T-1 (6mm) Tubular LES
Screw (LES, MES, SES)
Filament lamps will perform to specification and give optimum life when: they are powered at the rated voltage from a stabilised 50Hz ac supply; the ambient temperature is in the range +20°C to +25°C; and where no mechanical vibration is present.
Deviations from these criteria can have a significant effect on lamp life, particularly with low current filaments (<80mA).
Operation from a DC supply at rated voltage can reduce specified life by up to 50%. The effect of variation from the rated operating voltage should be noted: 5% above will reduce lamp life by up to 50%. 5% below will significantly increase lamp life. Current consumption can vary by up to ±10% on stated values at rated supply voltage. Care should therefore be exercised when running a number of lamps in series. In such applications it is recommended that the rated voltage be reduced by 10% to prevent premature failure of individual lamps.
Conversion of light output units: Lumens = MSCP x 12.6, MSCP = Lumens / 12.6.
Deviations from these criteria can have a significant effect on lamp life, particularly with low current filaments (<80mA).
Operation from a DC supply at rated voltage can reduce specified life by up to 50%. The effect of variation from the rated operating voltage should be noted: 5% above will reduce lamp life by up to 50%. 5% below will significantly increase lamp life. Current consumption can vary by up to ±10% on stated values at rated supply voltage. Care should therefore be exercised when running a number of lamps in series. In such applications it is recommended that the rated voltage be reduced by 10% to prevent premature failure of individual lamps.
Conversion of light output units: Lumens = MSCP x 12.6, MSCP = Lumens / 12.6.