TE Connectivity End Cap Clear, Semi-Rigid Polyolefin Adhesive Lined, 7.44mm
- RS Stock No.:
- 316-0903
- Mfr. Part No.:
- ES-CAP-NO.2-B9-X-30MM-RS
- Brand:
- TE Connectivity
Discontinued product
Alternative
This product is not currently available. Here is our alternative recommendation.
- RS Stock No.:
- 316-0903
- Mfr. Part No.:
- ES-CAP-NO.2-B9-X-30MM-RS
- Brand:
- TE Connectivity
Technical Reference
Legislation and Compliance
Product Details
End Caps 4:1
Specially designed to provide mechanical and environmental protection of stubs and splices in electrical harnesses and also ideal for sealing off cable ends. Clear cap allows see through inspection, black caps are flame retardant.
Thick adhesive-lining forms an effective barrier against fluids & moisture
4:1 shrink ratio allows a few sizes to cover a wide range of splice and component diameters
Mechanically tough jacket provides strain relief and abrasion protection
Range; -40°C to +105°C. min recovery 100°C
100 per bag.
4:1 shrink ratio allows a few sizes to cover a wide range of splice and component diameters
Mechanically tough jacket provides strain relief and abrasion protection
Range; -40°C to +105°C. min recovery 100°C
100 per bag.
Approvals
UL recognised component
Approvals
UL Listed (E85381)
Specifications
Attribute | Value |
|---|---|
| Type | End Cap |
| Inside Diameter Primary | 7.44mm |
| Adhesive Lined | Yes |
| Material | Semi-Rigid Polyolefin |
| Shrink Temperature | +100°C |
| Colour | Clear |
| Minimum Operating Temperature | -40°C |
| Maximum Operating Temperature | +105°C |
| Shrunk Diameter Primary | 1.65mm |
- RS Stock No.:
- 316-0903
- Mfr. Part No.:
- ES-CAP-NO.2-B9-X-30MM-RS
- Brand:
- TE Connectivity