Nexperia 74HCT574D,653 8 Flip Flop IC 74HCT, 3 State, 20-Pin SO
- RS Stock No.:
- 170-8020
- Mfr. Part No.:
- 74HCT574D,653
- Brand:
- Nexperia
Currently unavailable
We don't know if this item will be back in stock, RS intend to remove it from our range soon.
- RS Stock No.:
- 170-8020
- Mfr. Part No.:
- 74HCT574D,653
- Brand:
- Nexperia
Specifications
Technical Reference
Legislation and Compliance
Product Details
Find similar products by selecting one or more attributes.
Select all | Attribute | Value |
|---|---|---|
| Brand | Nexperia | |
| Product Type | Flip Flop IC | |
| Logic Family | 74HCT | |
| Input Type | TTL | |
| Output Type | 3 State | |
| Clock Frequency | 20MHz | |
| Polarity | Non-Inverting | |
| Mount Type | Surface | |
| Package Type | SO | |
| Minimum Supply Voltage | 4.5V | |
| Pin Count | 20 | |
| Maximum Supply Voltage | 5.5V | |
| Maximum Propagation Delay Time @ CL | 50ns | |
| Minimum Operating Temperature | -40°C | |
| Trigger Type | Positive Edge | |
| Flip-Flop Type | D Flip-Flop | |
| Maximum Operating Temperature | 125°C | |
| Number of Elements per Chip | 8 | |
| Length | 13mm | |
| Standards/Approvals | No | |
| Height | 2.45mm | |
| Automotive Standard | No | |
| Select all | ||
|---|---|---|
Brand Nexperia | ||
Product Type Flip Flop IC | ||
Logic Family 74HCT | ||
Input Type TTL | ||
Output Type 3 State | ||
Clock Frequency 20MHz | ||
Polarity Non-Inverting | ||
Mount Type Surface | ||
Package Type SO | ||
Minimum Supply Voltage 4.5V | ||
Pin Count 20 | ||
Maximum Supply Voltage 5.5V | ||
Maximum Propagation Delay Time @ CL 50ns | ||
Minimum Operating Temperature -40°C | ||
Trigger Type Positive Edge | ||
Flip-Flop Type D Flip-Flop | ||
Maximum Operating Temperature 125°C | ||
Number of Elements per Chip 8 | ||
Length 13mm | ||
Standards/Approvals No | ||
Height 2.45mm | ||
Automotive Standard No | ||
The 74HC574, 74HCT574 is an 8-bit positive-edge triggered D-type flip-flop with 3-state outputs. The device features a clock (CP) and output enable (OE) inputs. The flip-flops will store the state of their individual D-inputs that meet the set-up and hold time requirements on the LOW-to-HIGH clock (CP) transition. A HIGH on OE causes the outputs to assume a high-impedance OFF-state. Operation of the OE input does not affect the state of the flip-flops. Inputs include clamp diodes. This enables the use of current limiting resistors to interface inputs to voltages in excess of VCC.
Mixed 5 V and 3.3 V applications
Improved signal integrity with integrated termination resistors
High noise immunity
Flow through pin out for easy layout
Wide supply voltage range
Low propagation delay
Overvoltage tolerant input options
Integrated source termination resistor options
Bus hold options
Key applications
Frequency division
Controlled delays
Interface between asynchronous and synchronous systems
Related links
- Nexperia 74HCT273D D Type, 20-Pin SO
- Nexperia 74HC574D 3 State, 20-Pin SO
- Nexperia 74HCT245D 3 State, 20-Pin SO
- Texas Instruments 8 Flip Flop IC HCT 20-Pin SOIC
- Nexperia 74LVC574APW 3 State, 20-Pin TSSOP
- Texas Instruments 8 Flip Flop IC AHCT 20-Pin TSSOP
- Texas Instruments 8 Flip Flop IC HC 20-Pin SOIC
- Texas Instruments SN74AHCT574PWR 8 Flip Flop IC AHCT 20-Pin TSSOP