Ruland Beam, 31.8mm Outside Diameter, 7 mm, 8 mm Bore, 38.1mm Length Flexible Coupling

The RS PRO series of carbon film axial leaded resistors offer excellent long term stability and feature standard solder-plated copper leads. The carbon film is the most common axial leaded resistor which is used for applications where a very good tolerance and temperature coefficient are not necessary.

Available in resistances from 1 Ohm to 9.1 mOhm
0.25W power rating
5% tolerance
Resistor body 2.3 mm in diameter, 6.3 mm in length
Carbon film construction
Long-term stability
Solder plated copper leads

Carbon composition resistors are made from a moulded carbon powder that has been mixed with a phenolic resin to bind and create a uniform resistive body. It is then surrounded in an insulating case after attaching end leads.

The power rating of a resistor describes the amount of power that the resistor can dissipate safely.

Each of the colour bands has a specific meaning. The first two colours give the base value of the resistor, the next gives the multiplier and the final band the tolerance. If a resistor has five bands, it is a more precise resistor, in which the first three bands represent the base values, and the fourth and fifth represent the multiplier and tolerance respectively.

RS PRO is our own brand range and brings you a wide range of high-quality, great value products offering you more choice. Trusted by engineers all over the world, every part of every RS PRO product has been rigorously tested against demanding industry standards; they’re only given the RS PRO Seal of Approval if we’re confident of their exceptional quality, which means you can be confident too.

The Ruland Four beam coupling offers an innovative solution for precise motion transmission in high-performance applications. Crafted from premium 7075 aluminum, this coupling is designed to connect shafts with misalignment, ensuring optimal performance at speeds up to 6,000 RPM. Its zero-backlash feature ensures consistent torque and reduces vibration, making it suitable for dynamic environments. The robust design incorporates four beams, providing higher torque capacity and greater resilience compared to traditional couplings. This coupling is manufactured with strict quality controls in Marlborough, MA, ensuring it meets high standards of durability and efficiency. With compliance to RoHS3 and REACH regulations, it is both an environmentally friendly and reliable choice for your operational needs.

Machined from a single piece for enhanced durability
Lightweight construction minimizing inertia
Optimized for high-speed applications with balanced design
Compatible with metric hardware for universal application
Ensures zero backlash for precise motion control
Temperature range accommodates diverse operational environments
Performance is validated for various torque ratings
Full bearing support required, ensuring stability under load
Includes installation instructions for straightforward setup

A comprehensive range of high stability carbon film resistors qualified and tested to the requirements of IEC 115 and IEC 115-2. The ruggedised welded cap and lead method of manufacture provides a considerable strength and resistance to damage. The coating materials and the colour bands are epoxy resin and are highly resistant to solvents, abrasion and chipping. Improvements in materials and processing have allowed the rated power to be improved. Excellent stability against changes in load conditions or moisture levels, with a low noise level and high reliability make these carbon film resistors suitable for a wide range of applications. Rated at 70°C in free air mounted horizontally. Climatic category 55/155/56.