A tough pourable rubber compound for part encapsulation, rugged flexible moulds and patterns, holding fixtures and forming die pads.

Available in three grades to cover a variety of applications with different flexibility requirementsGood abrasion and wear resistanceSelf levellingCan be used for part encapsulation, moulds and patterns, equipment linings, holding fixtures and forming die pads.Flexane 60 High flexibilityFlexane 80 Medium flexibilityFlexane 94 Low flexibility

The ITW Devcon urethane liquid is a 500g, tough pourable rubber compound for part encapsulation, rugged flexible moulds and patterns, holding fixtures and forming die pads and comes with Flexane hardener. It can also be used to form equipment linings that are abrasion-resistant and noise reducing. This is also used for part encapsulation, moulds and patterns, equipment linings, holding fixtures and forming die pads.
Filled Epoxies:
Versatile durable two-part epoxy compounds for maintenance and repair of a broad range of equipment. Cured repairs can be drilled, tapped, machined or painted which has long-life protection against abrasion, corrosion and chemicals.

• Cure time is 16 hours
• Good abrasion and wear resistance
• Low flexibility
• Self levelling
• Maximum operating temperature is +82°C

• Casting flexible parts and moulds
• Casting, corrosion protection
• Lines process equipment to dampen noise
• Noise dampening
• Pads for press brake forming
• Pouring concrete expansion joints
• Protects equipment surfaces from wear and corrosion
• Wear protection

• ANSI/ESD S20.20:2014
• BS EN 61340-5-1:2007

Filled Epoxies

Versatile durable two-part epoxy compounds for maintenance and repair of a broad range of equipment. Cured repairs can be drilled, tapped, machined or painted which has long-life protection against abrasion, corrosion and chemicals.