RS PRO Ethernet Media Converter

Technical Reference
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): TW
Product Details

RS Ethernet Converter (RJ45‐Fiber)

10/100Base-TX to 100Base-FX Converter
Auto-Negotiation or forced mode
Auto MDI/MDIX
Forward 2046 bytes (Max.) packets in switch mode
Forward 9K jumbo packets in converter mode
Supports Q in Q double tagged frame transparent
Supports IEEE 802.1q Tag VLAN pass through
Supports local / remote In-band management (Monitor and Configure) by the SNMP manager with FRM220-10/100iSpecifications
Bandwidth control (Nx32K or Nx512Kbps)
Supports flow control (Pause)
Supports remote CPE power fail detect (dying gasp)
Supports Far End Fault Indication (FEFI)
Supports Link Fault Pass-Through (LFPT )
Supports Loop Back Test
Supports RMON counter
Auto Laser Shutdown (ALS)
Fiber Hardware Reset (FHR)
Online local / remote f/w upgrade

Connector: 1x9 (ST)
Data rate: 125Mbps
Duplex mode: Full duplex
Fiber: MM 62.2/125μm
Distance: MM 2km
Wavelength: MM 1310nm
Power Input: AC 100∼240V
LEDs: Power, FX Link, TX SPD, TX Link, TX Duplex, FEF

Optical Interface:

Standards

IEEE 802.3, IEEE 802.3u

10 In stock - FREE next working day delivery available
Price Each
£ 156.38
(exc. VAT)
£ 187.66
(inc. VAT)
Units
Per unit
1 +
£156.38
Related Products
The ET91000SM402 1000 Mbps Gigabit Single Mode Fiber ...
Description:
The ET91000SM402 1000 Mbps Gigabit Single Mode Fiber Media Converter SC (40 km) lets you extend a Gigabit Ethernet network over single mode fiber by up to 40km (25 miles).A cost-effective solution for connecting a Gigabit Ethernet (1000Base-T) network to remote network segments over a (1000Base-LX/SX) fiber backbone, the GbE ...
Introducing the Ethernet to BNC Ethernet converter from ...
Description:
Introducing the Ethernet to BNC Ethernet converter from RS PRO, a compact and cost effective media converter. This converter features an interface connector with one RJ-45 Jack from (Hub/station) select switch and a BNC socket to 10 Base-2 offering quick and easy installation. The RS PRO Ethernet to BNC Ethernet ...
The ICP DAS USA RS-232 to RS-485 converter ...
Description:
The ICP DAS USA RS-232 to RS-485 converter with auto-tuning function and auto-switching baud rate. It is made of fire-retardant materials. However, RS-232 has limited transmission speed, communication range, and networking capabilities. The RS-485 standard overcomes these limitations by using differential voltage lines for data and control signals that converts ...
The I-7510 provides 2-way optical isolation between one ...
Description:
The I-7510 provides 2-way optical isolation between one piece of RS-422/RS-485 equipment and the rest of the system. It can also be used as a repeater to extend the transmission signal of an existing RS-485 network to beyond 4000 feet. Works as a RS-485/422 repeater and RS-422 to RS-485 signal ...