Phoenix Contact PTFIX series distribution blocks with push in connection offer a flexible distribution solution with different numbers of positions and mounting options. They can be used straight away and expanded as needed. Simply unpack, connect, and you are done.

Push in connection
Voltage: 500 V
Current: 24 A
Variants in 1.5 mm² and 2.5 mm²
2.5 mm² power blocks with additional 6 mm² terminal point
Number of terminal points: 6, 12 and 18
Can be bridged and aligned with standard plug-in bridges
Testing option for all common test probes

This distribution block from Phonix Contact is an essential component in electrical power distribution systems. It works by channelling power from a single input source into its terminals to provide energy to connected devices. Thanks to its 19 output ports, it allows for multiple devices to be connected and powered, eliminating the need for lots of wires.
A polyamide (PA) material housing is on hand to provide effective insulation, protecting you and your equipment from electric shocks. The block's push-in direct connection technology allows for the simple plugging of solid and stranded conductors into its terminals without the use of specialised tools.
For increased versatility, you can expand the number of outputs using a standard plug-in bridge. The block can be mounted transversely on DIN rails to save space in compact setups.

• Cable cross-sectional area (CSA) of 0.14 to 4 mm²
• Grey colour
• Current rating of 24 A, 41 A at 6 mm²
• Not fused
• Voltage rating of 500 V
• Wire size of 26 to 12 AWG (American wire gauge)

Push-In Connection Terminal Blocks

The PT series is characterised by easy, direct conductor connection, and it consistently uses the advantages of the CLIPLINE complete system. The up to 50% lower insertion forces of the PT push-in connection method also allows easy and direct plugging of solid and stranded conductors with ferrules of 0.34mm² and up.