Phoenix Contact PTFIX series distribution blocks with push in connection offer a flexible distribution solution with different numbers of positions and mounting options. They can be used straight away and expanded as needed. Simply unpack, connect, and you are done.

Push in connection
Voltage: 500 V
Current: 24 A
Variants in 1.5 mm² and 2.5 mm²
2.5 mm² power blocks with additional 6 mm² terminal point
Number of terminal points: 6, 12 and 18
Can be bridged and aligned with standard plug-in bridges
Testing option for all common test probes

Use this versatile distribution block from Phoenix Contact to effectively split power from a single input source to various output circuits. It's a simple-to-use component with 12 terminals that offer high contact quality for reliable energy transmission. As its housing is made of polyamide (PA), it's properly insulated to provide protection from electrical short circuits. This material is also long-lasting and corrosion-resistant, making it a good choice for use in demanding environments.
This powerful component can support voltages of up to 500 V and currents of up to 24 A, so it's ideally suited for heavy-duty electrical setups. Its modern CLIPLINE push-in termination technology means you don't need any tools to connect conductors to terminals as you can press the wires directly into the block.
The unit also saves space thanks to its compact dimensions. It's useful in various applications, from household electrical installation to industrial panel setups.

• Cable cross-sectional area (CSA) of 0.14 to 4 mm²
• Grey colour
• Not fused
• Wire size of 26 to 12 AWG
• Dimensions of 31.2 (W), 28.2 (L) and 21.2 mm (H)

Push-In Connection Terminal Blocks

The PT series is characterised by easy, direct conductor connection, and it consistently uses the advantages of the CLIPLINE complete system. The up to 50% lower insertion forces of the PT push-in connection method also allows easy and direct plugging of solid and stranded conductors with ferrules of 0.34mm² and up.