Standard or feed through rated at 750V . Terminals of the same type may be cross connected using the pre-assembled jumper bars for up to 10 poles (2.5mm-16mm terminals) and 2 poles (35mm terminals).,TSCH partitions fit jumper bar cut outs.

TSCH small partitions fit SAK 2.5, 5, 6N, 10 and 16 standard terminals.,Stock No.s 425-639 and 425-645 do not have DEMKO Approval

CSA certified, UL listed, NEMKO, SEV, KEMA, DEMKO

Link cables in your electrical system by passing them through this feed-through terminal block from Weidmuller. It's made from tough PA66, so it stands strong against impact and wear. As its housing also has self-extinguishing properties, you can rest assured it won't contribute to the spread of a fire. Mount this terminal block in a snap by clipping it to a DIN rail without the need for any tools. The open right side of this product gives you free rein to adjust wires as needed without taking it off the rail.

• Rated impulse withstand voltage of 8kV to stand up to powerful surges
• Reliable performance in harsh conditions, thanks to its wide operating temperature range between -50°C and +100°C
• Current rating of 24A for use with heavy-duty equipment

• Medical technology
• Telecommunications
• Building automation
• Chemical plants

You can fit wires that range in size from 26 to 10AWG into this terminal block, so it's a versatile piece of kit.

1, 2, 4 -7

SAK Series

Terminals manufactured from polymide 6.6 with a working temperature of -50°C to +100°C except the fused terminal block (425-689) which is high grade melamine with a working temperature of -60°C to +130°C. Asymmetric rail (G-profile) to B 5825:1980 EN 50035 mounting