Looking for a way to link up a solenoid valve in your pneumatic system? Use this solenoid valve connector from Belden Hirschman. It has a protective circuit to protect against electromagnetic interference and power surges, so it reduces the risk of downtime. An integrated indicator light lets you monitor the status of your equipment. Installation is made easy thanks to screw-down termination and mounting methods.

• Glass-filled nylon housing enhances impact resilience, making it a durable choice
• Accepts cable diameters of 4.5 to 11mm for wide compatibility
• IP65 rating means it's dust-tight and resistant to low-pressure water jets

• Pressure transducers
• Temperature sensors
• Machine manufacturing

A pole format of 2P+E means that there are two poles, as well as an earth contact to minimise the risk of electric shocks.

Type A DIN 43650 Hirschmann

A comprehensive range of cable sockets, appliance connector bases and accessories typically for use with solenoid valves on pneumatic and hydraulic equipment. The inner connector can be rotated through 90° increments so the gland can be positioned in all four directions. Housing material is glass-filled nylon making them impact resistant.,All Hirschmann appliance connectors feature terminals that can be screwed onto bare or ferruled conductors, or will accept crimp ring/fork terminals under the head of the screw.,All are supplied complete with centre retaining screw, while plug bases are solder terminated and supplied with fixing screws. Suitable gasket to provide IP65 sealing, stock-no. 156-4729. Supplied in bags of 10