Digilent 410-299 for use with JTAG-HS3, Xilinx Tool

  • RS Stock No. 134-6435
  • Mfr. Part No. 410-299
  • Brand Digilent
Technical Reference
Legislation and Compliance
RoHS Certificate of Compliance
Product Details

JTAG-HS3 FPGA Programming Cable

The JTAG-HS3 programming cable allows high-speed programming/debugging of Xilinx FPGA and SoC devices from a host PC.


• Separate Vref drives JTAG signal voltages
• Vref can be any voltage between +1.8V and +5V
• USB 2.0 HS port drives JTAG bus at up to 30Mbit/sec
• Compatible with Xilinx ISE 14.1 and newer
• Compatible with Xilinx Vivado 2013.3 and newer
• PC connector: MicroUSB
• JTAG connector: 2 x 7-pin 2mm
• Open-drain buffer on pin 14 allows processor reset of Xilinx Zynq platform

Supported Target Devices

• Xilinx FPGAs • Xilinx Zynq-7000
• Xilinx CoolRunner™/CoolRunner-II CPLDs
• Xilinx Platform Flash ISP configuration PROMs
• Selected third-party SPI PROMs
• Selected third-party BPI PROMs

Target Devices Not Supported

• Xilinx 9500/9500XL CPLDs • Xilinx 1700 and 18V00 ISP configuration PROMs
• Xilinx FPGA eFUSE programming


This cable is not needed for Digilent Xilinx FPGA boards as they have this functionality built-in.

Supplied with

USB cable

An FPGA is a semiconductor device consisting of a matrix of Configurable Logic Blocks (CLBs) connected through programmable interconnects. The user determines these interconnections by programming SRAM. A CLB can be simple (AND, OR gates, etc) or complex (a block of RAM). The FPGA allows changes to be made to a design even after the device is soldered into a PCB.

Attribute Value
For Use With JTAG-HS3, Xilinx Tool
186 In stock - FREE next working day delivery available
Price Each
£ 45.21
(exc. VAT)
£ 54.25
(inc. VAT)
Per unit
1 +
Related Products
The Power Debugger is a powerful development tool ...
The Power Debugger is a powerful development tool for debugging and programming AVR microcontrollers. The tool is using UPDI, JTAG, PDI, debug WIRE, a Wire, TPI or SPI target interfaces. It is using JTAG or SWD target interfaces for the ARM Cortex-M based SAM microcontrollers.Extra features of the Power Debugger ...
A general purpose LED module in Grove form ...
A general purpose LED module in Grove form factor, available in different colours. The ingenious PCB design enables you to bend the LED to any position you want, which makes it easy to use it stand alone, horizontal or Panel Mount(from left to right in below pics). Standard Grove connector ...
Designed to control brushed 12V DC motors, supports ...
Designed to control brushed 12V DC motors, supports other motors within 12-24VSmooth and precise motor control aided by fast output switching frequency Easily mountable to robot frames via through-bolt mounting holes and zip-tie channels Ruggedized, durable case Thermally-aware design, does not require a fan for cooling Robust large gauge input/output ...
The i Button is a computer chip enclosed ...
The i Button is a computer chip enclosed in a 17mm diameter stainless steel can. Because of this unique and durable container, up-to-date information can travel with a person or object anywhere they go. It can be mounted anywhere because it is rugged enough to withstand harsh environments, indoors or ...