DOGA Geared DC Geared Motor, 24V dc, 12 Nm, 25rpm, 9 mm Shaft Diameter
- RS Stock No.:
- 181-6490
- Mfr. Part No.:
- 317.2761.3B.00E
- Brand:
- DOGA
Subtotal (1 unit)*
£152.99
(exc. VAT)
£183.59
(inc. VAT)
FREE delivery for orders over £60.00
In Stock
- Plus 3 unit(s) shipping from 04 May 2026
Need more? Click ‘Check delivery dates’ to find extra stock and lead times.
Units | Per unit |
|---|---|
| 1 + | £152.99 |
*price indicative
- RS Stock No.:
- 181-6490
- Mfr. Part No.:
- 317.2761.3B.00E
- Brand:
- DOGA
Specifications
Technical Reference
Legislation and Compliance
Product Details
Find similar products by selecting one or more attributes.
Select all | Attribute | Value |
|---|---|---|
| Brand | DOGA | |
| Supply Voltage | 24V dc | |
| Product Type | DC Geared Motor | |
| Sub Type | Geared | |
| Output Speed | 25rpm | |
| Shaft Diameter | 9mm | |
| Maximum Output Torque | 12Nm | |
| Mount Type | Screw | |
| Gearhead Type | Worm | |
| Gear Ratio | 62:1 | |
| Current Rating | 1.1A | |
| Material | Polylactic Acid | |
| Length | 43.8mm | |
| Shaft Length | 18mm | |
| Standards/Approvals | VDE 0530 | |
| Depth | 90.8mm | |
| Width | 177.5mm | |
| Series | 317 | |
| Core Construction | Permanent Magnet | |
| Select all | ||
|---|---|---|
Brand DOGA | ||
Supply Voltage 24V dc | ||
Product Type DC Geared Motor | ||
Sub Type Geared | ||
Output Speed 25rpm | ||
Shaft Diameter 9mm | ||
Maximum Output Torque 12Nm | ||
Mount Type Screw | ||
Gearhead Type Worm | ||
Gear Ratio 62:1 | ||
Current Rating 1.1A | ||
Material Polylactic Acid | ||
Length 43.8mm | ||
Shaft Length 18mm | ||
Standards/Approvals VDE 0530 | ||
Depth 90.8mm | ||
Width 177.5mm | ||
Series 317 | ||
Core Construction Permanent Magnet | ||
The DOGA 317 series comprises of a permanent magnet DC motor with worm gearbox developed for a compact, low noise and cost effective solution to suit many applications. Standard supply voltages are 12 or 24Vdc that can be supplied from a battery or power supply unit, with nominal output torque up to 4Nm and starting torque up to 12Nm the geared motor is suitable for applications that need high power at start-up. Output speeds range from 25rpm up to 65rpm to suit the application requirements, a DC motor controller can be used with this motor if variable output speed control is required. Protected against dust and water ingress and an EMC filter is available on many articles for limiting electrical interference. The standard worm gear wheel is made from hardened plastic offering low noise and good performance.
Application
Agriculture
Building access
Care aid
Medical
Office equipment
Marine
General industrial automation