30W single/dual output high power density regulated isolated DC-DC converter modules with a wide input voltage range and encapsulated metal package. These single/dual output high power density regulated isolated DC-DC converter modules have a high efficiency which allows an operating temperature range of -40°C to +85°C. Typical applications for these isolated DC-DC converter modules include mobile equipment, instrumentation and distributed power architectures in communication and industrial electronics.

High power density, 25.4x50.8x10.2mm package
Wide 2:1 input voltage range
Regulated outputs
±10% adjustable output voltage by using external resistors (single output models only)
1.5kV input / output isolation
High efficiency up to 91%
No minimum load required
Input filter meets EN 55022 Class A
Remote On/Off
Over-temperature, over-voltage, over-load and short circuit protection
Shielded metal case with insulated baseplate
Industry standard pin-out

Operating temperature is with derating of 4% per °C above 65°C.
MTBF to MIL-HDBK-217F (25°C).
Load regulation for dual output models is for balanced load.
For suitable heatsink see stock number 745-1234
For suitable common mode chokes see stock number 745-1222 (L1) and 745-1231 (L2)

EN 60950-1, UL 60950-1, IEC 60950-1

Transform your power source in a flash with this DC-DC converter from Traco Power. It gets to work in 30ms, so you're not left hanging around for power conversion to kick in. As the unit takes a wide input range of 18 to 36V DC and converts it to a 12V DC output, it's versatile and well-suited to powering low-voltage equipment. Built-in protection against EMI ensures there's no risk of signal interference degrading your system's performance. Thanks to integrated short-circuit protection, this device quickly recovers from power faults, minimising system downtime.

• 91% efficiency means minimal power is lost as heat, so you won't need to install a heat sink
• Compact measurements of 50.8 (L) x 25.4 (W) x 10.2mm (D) to slip neatly into a compact enclosure
• Epoxy resin insulation prevents dangerous contact with the electrical load

• Portable devices
• Telecommunications networks
• Power distribution equipment

This unit comes with a labelled top plate that explains its pins, making it easy to check where your connections go during wiring.