150W single output regulated isolated DC-DC converter modules with shielded metal case, heat sink, screw terminal connections and flanges for easy chassis or wall mounting. These 150W single output regulated isolated DC-DC converter modules have a high efficiency which allows an operating temperature up to +50°C with natural convection cooling and an adjustable output voltage with constant current characteristic for battery charger applications. The TEP150WI series of DC-DC converters features high immunity against surge, burst, radiated and conducted disturbances as well as high resistance to shock and vibration. These regulated isolated DC-DC converter modules are ideal for railway and industrial applications.

Shielded metal case with screw terminals
Ultra wide 4:1 input voltage ranges 8.5–36, 16.5–75, 43–160 VDC
EN 50155 approval for railway applications
Very high efficiency up to 87%
Constant current output characteristic for battery load applications
Optional with input filter to meet EN55022 class B
Overtemperature protection
Wide Operating temperature range: –40°C to +75°C
Reverse input protection
Under voltage lock-out
I/O isolation 2250 VDC
Easy chassis and wall mounting

UL 60950-1, IEC/EN 60950-1

UL/cUL, CB, Raylway

Need to switch up your power supply in busy industrial settings? Reach for this Traco Power DC-DC converter. By providing output voltages between 15 and 18V DC, it's a flexible option that adapts to your circuit's needs. Thanks to its shielded metal casing, the device shrugs off high EMI levels to deliver a smooth and steady input. Electrical faults are no problem, thanks to built-in overload, overvoltage and short-circuit protections. As you can see by its ±0.4% load regulation rating, the converter gets on with the job without a hiccup.

• Mounts directly to a machine's chassis for easy installation
• Conversion efficiency of 86% means very little energy goes to waste
• Maximum ripple voltage of 100mVp-p to cut disruption from electrical line noise
• Screw terminals keep your fingers clear of conductors during wiring
• Handles temperatures between -40°C and +75°C, so it stands up to tough conditions

• Chemical processing
• Rail industry
• Metalworking

EMI is electromagnetic interference that comes from sources outside the component, such as other devices and thunderstorms. Ripple voltage refers to the residual alternating current that can still affect a DC load after its conversion from AC.

Traco - 75W to 240W - TEP Series