The RxxP22005D Series are designed especially for SiC-MOSFET drivers in efficiency focused applications such as electrical vehicles, renewable-energy conversion and high powered industrial drives. These converters enable the gate driver to apply optimal turn-on and turn-off voltages (VGS) by providing asymmetrical +20V/-5V outputs. As unregulated 2 W converters, the devices feature power-sharing outputs that can be used with equal-power (asymmetrical current) or equal-current (asymmetrical power) loads. The RxxP22005D series operates at up to 85% efficiency and are available with 5 V dc, 12 V dc, 15 V dc or 24 V dc input voltages. These converters meet harsh environmental requirements with their operating temperature range of -40°C to +95 °C (with derating).

Features and Benefits

High 5.2kVDC/1 minute Isolation
Power Sharing
Efficiency up to 85%
Wide Operating Temperature Range

UL60950 and IEC/EN60950

Use this DC-DC converter from RECOM to ensure your SiC-MOSFET drivers get the juice they need. It's a nifty gadget that transforms different DC inputs into asymmetrical +20V/-5V DC outputs to support efficient operation. Thanks to through-hole mounting, you can install the unit on your PCB in a flash. It's a compact device, with slimline dimensions of 19.5 (L) x 9.8 (W) x 12.5mm (D), so squeezes easily onto crowded boards. Short-circuit protection ramps up safety by preventing equipment damage and possible injuries. Plus, automatic recovery ensures your applications stay active to avoid unscheduled service interruptions.

• Tough plastic casing protects and insulates internal components
• 82% efficiency for low power consumption and heat control
• Broad operating temperature scope between -40°C and +95°C for use in demanding conditions

• Electrical vehicles
• Renewable energy conversion applications
• High-power industrial drives

This component is widely compatible thanks to an input voltage range between 10.8 and 13.2V DC.

DC-DC converters such as this one simplify power supplies to streamline systems. They also boost overall safety by keeping primary and secondary circuits apart.

Recom Isolated DC/DC Converter