Chauvin Arnoux PEL103 Power & Energy Data Logger, Bluetooth, Ethernet, USB, 7 Input Channel(s)

Unavailable
RS will no longer stock this product.
RS Stock No.:
778-1034
Mfr. Part No.:
P01157153
Brand:
Chauvin Arnoux
Find similar products by selecting one or more attributes.
Select all

Brand

Chauvin Arnoux

Number of Input Channels

7

Model Number

PEL103

Measurement Parameters

Current, Energy, Frequency, Harmonics, Power, Voltage

Sensor Type

Current Sensor

Interface Type

Bluetooth, Ethernet, USB

Data Logger Type

Power & Energy

Maximum Voltage Measurement

1000V ac/dc

Power Source

Mains

IP Rating

IP54

Minimum Operating Temperature

0°C

Maximum Operating Temperature

+50°C

Maximum Current Measurement

10 kA ac, 1,4 kA dc

Display Type

LCD

Dimensions

256 x 125 x 37mm

Includes

1 bag, 1 mains cable, 1 safety datasheet, 1 SD card, 1 SD-USB adapter, 1 set of inserts/rings, 1 USB cable, 4 black crocodile clips, 4 x 3 m black silicone cables straight banana / straight banana, operating manual on CD, PEL Transfer PC software, quick start-up guide

Best Voltage Measurement Accuracy

±0,2 %

Best Current Measurement Accuracy

±0,5 %, ±1,2 %, ±1,7 %, ±3,2 %

Battery Type

Rechargeable Battery

RoHS Status: Exempt

COO (Country of Origin):
FR

PEL103 Power Energy Logger (Unit Only)


The PEL103 Power Energy Logger is designed to measure and record the consumption of electrical installations in order to improve energy efficiency and reduce costs.

• 4 Voltage channels + 3 Current channels
• Triple digital display
• Suitable for use on single-phase, split-phase and three-phase installations
• Can be installed without cutting off the mains power supply
• Map the electrical consumption on a site
• Gain a real-time snapshot of consumption
• Analyse electrical network quality
• Record harmonics up to the 50th order with phase indication
• Record results to an SD card
• Real-time communication with a PC
• Data transfer and analysis with supplied PEL software

The PEL103 Logger is sold without sensors. Find the MN93A clamp 236-559 and the AmpFLEX™ A193-450 mm clamp 236-565 current sensors here, available separately.

Standards

IEC 61010 600 V CAT IV – 1,000 V CAT III

Supplied with

• 4 measurement leads (straight banana, 3 m long, black)
• 4 crocodile clips (black)
• 1 SD card (2 GB)
• 1 set of rings and inserts (for ends of leads and current sensors)
• 1 mains cable
• 1 USB cable (Type A, Type B)
• 1 Multifix mounting systems
• 1 operating manual (on CD)
• 1 bag
• 1 safety datasheet
• PEL Transfer PC software
• 1 quick start-up guide
• SD Card to USB adapter

Note

Software is not supplied. PEL software can be downloaded from https://www.chauvin-arnoux.com/